ED125-1 Albright Emergency Battery Disconnect Switch 125A - 48V Maximum
Weight: 370 g
Bar Code: DNA
Part Number: ED125-1
Voltage: 12V to 48V DC
Pre-order and back-ordering is available with a current 9 to 12 weeks despatch. Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.
Albright 125A heavy-duty compact emergency battery disconnect switch.
- Rated 125 Amps, 48Vdc maximum current.
- Single-Pole, Single-Throw (SPST).
- Two M5 fixing screws at 48mm centres.
- Two M8 hex bolts for battery cable fixing.
- With an open housing for inspection of the contacts.
|For a lockable version use ED125L-1 |
- 25mm diameter shaft clearance or panel hole.
- Total height including button: 102mm.
Body Beneath Panel Dimensions
- Width: 55mm.
- Depth: 43mm.
- Depth including cable bolts approximately: 62mm.
About the ED125 Emergency Stop Switch
Typically used on 12 Volts, 24 Volts and 48 Volts DC electric vehicle systems, the ED125 is a manually operated device with an over-centre spring mechanism, which provides a snap action for both opening and closing of the main contacts. The ED125 is easy to install (see drilling details) and is secured with supplied M5 Posidrive mounting screws.
|Uninterrupted Current: No or infrequent load switching requirements (maintains a lower contact resistance). |
|Application ||Uninterrupted |
|Device Type ||NC - SP - ST |
|Thermal Current Rating (Ith) ||125 Amps |
|Intermittent Current Rating ||30% Duty 230A |
40% Duty 200A
50% Duty 175A
60% Duty 160A
70% Duty 150A
|Overload Currents |
that can be Ruptured
|800A at 48V D.C. |
|Maximum Recommended |
|48V D.C. |
|Typical Voltage Drop Per Pole |
Across New Contacts At 100A
|Operating Ambient Temperature ||-40 to +60℃ |
|Weight ||300g |
Free UK Mainland Postage and Packaging
Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.
International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
Export orders will only be accepted when placed online.