Switch Relays

12V glow plug controller, pre-heat time less than 14 seconds. Replacement for Bosch: 0.333.402.501 and Cartier: 02386.

12V glow plug controller, pre-heat time less than 8 seconds. Replacement for Bosch: 0.333.402.509 and 0.333.402.524.

12V glow plug controller, pre-heat time less than 8 sec. with post heat. Replacement for Audi-VW: 171911261A and 171911261B.

12V glow plug controller, pre-heat time less than 12 sec. with post heat. Replacement for Ford: 1630363, 1630263 and 6132248.

12V glow plug controller, pre-heat time less than 7 sec. with post heat. Replacement for Audi-VW: 191911261A and 191911261C.

Durite 12V relay or glow plug controller, pre-heat relay with post heat. Replaces Ford: 1693301 and 9M5Q12A343AA.

Durite 12Vdc 2/4 x 21+5W hazard flasher unit. An electronic unit that replaces the can hot wire type flasher in some applications. Without earth.

Durite 12Vdc 1-4 x 21W hazard flasher relay. An electronic unit that replaces the Popple hot wire type. Without earth. No bulb failure indication.

Durite 12Vdc 2 x 21+5W Popple flasher relay with two 6.3mm blade terminal connections. No fixing bracket is supplied with this unit.

Durite 12Vdc 4 x 21+5W Popple hazard flasher relay with 6.3mm blade terminal connections. No fixing bracket is supplied with this unit.

Durite 6V four terminal fused mini make and break relay with fixing bracket.

12Vdc fused 4 pins Make and Break relay with splashproof cover. 12 Volts 20A. Replaces Lucas: SRB532, Guilera: 361 and Hella: 4RA003205-151.

24V fused 4 pin make and break relay with splashproof cover. 24 Volts 15A switch relay protected to IP65

12Vdc 4 terminal mini Make and Break automotive relay, normally closed (NC). 12 Volts 20 Amps switch relay with four 6.3mm blade terminals.

24V extra heavy-duty make and break relay with bracket, rated 60A, two 6.3mm blade terminals, two M6 studs.

12Vdc heavy-duty Make and Break vehicle relay with an integral bracket. 12 Volts 75 Amps relay with two 6.3mm blade terminals and two M5 screw terminals.

Durite 12Vdc extra heavy-duty Make and Break auto relay with bracket. 12 Volts 200 Amps switch relay with two 6.3mm blade terminals and two M6 studs.

Durite 12Vdc 100 Amps heavy-duty Make and Break automotive relay with an integral bracket. Replaces Guardian: GR19.

Durite 12Vdc micro Make and Break auto relay with a sealed resistor. 12 Volts 25 Amps switch relay with two 6.3mm and two 4.8mm blade terminals.

Durite 12Vdc 4 terminal mini Make and Break vehicle relay with a sealed resistor. 12 Volts 30 Amps switch relay with four 6.3mm blade terminals.

24 Volts DC 40 Amps heavy-duty make and break automotive relay, integral bracket, 2 x 6.3mm terminals, 2 x M5 screw terminals.

Durite 12Vdc micro Make and Break automotive relay with sealed diode. 12 Volts 25 Amps switch relay with two 6.3mm and two 2.8mm blade terminals.

Durite classic 6RA style 12Vdc 30A Make and Break relay with bracket. 12 Volts 30 Amps switch relay with five 6.3mm terminals.

24V micro make and break relay with sealed resistor, 10A, with two 6.3mm terminals and two 4.8mm blade terminals.

Durite 12Vdc mini double Make and Break relay. 12 Volts, 2 x 25 Amps switch relay. Replaces Lucas: SRB521 and Bosch: 0.332.014.113.

Durite 12Vdc 70A-20A split charge relay that isolates the fridge circuit. 2 x 2.8mm, 1 x 6.3mm and 2 x 9.5mm terminals. Replaces Lucas SRB630.

Durite 24V mini make and break 4 pin relay with sealed resistor and without bracket, 20A, four 6.3mm blade terminals.

24V micro make and break 4 pin relay with sealed diode, 10A, two 6.3mm blade terminals, two 2.8mm blade terminals.

Durite 12V 140A voltage sensitive relay for split charging, with Red LED indicator, makes at 13.3V and breaks at 12.8V.

Durite 12Vdc 80A voltage-sensitive battery isolator relay. 12 Volts 80 Amps isolator that disconnects non-essential loads from the battery.