Durite 8.75A Black and Red standard twin-core automotive cables in a flat moulded sheath for a vehicle wiring loom. PVC sheathed and copper-cored electrical wire supplied on cardboard cable reels for van or workshop storage racks and dispensers.
- 1mm² (17AWG) Black and Red.
- 8.75 Amps twin-core automotive cables and vehicle wiring.
- 14 copper strands at 0.30mm.
- Outside measurement: 6.5mm x 4.0mm.
- Manufactured to BS6862-1:1971.
- Roll length: 30m or 100m.
About the 0-952-51 1.00mm² Black and Red PVC Electric Cables
Arc Components Limited presents the 0-952-51 and 3-952-51, Durite's light-duty 8.75A Black Negative (-) and Red Positive (+) twin-core automotive cables, ideal for your vehicle's connection to electrical equipment with a low load requirement.
This high-quality PVC flat sheathed, copper-cored electrical wire is supplied on a 30m or 100m cardboard reel, perfect for storage in your van or workshop ready-use wiring racks. It is 1.0mm² (17 AWG) and features two 14 strands of 0.30mm separate copper wires bound together in a PVC sleeve and then moulded into a flat PVC sheath, with an outside measurement of 6.5mm x 4mm. It meets all necessary standards for electrical equipment wiring for domestic and commercial vehicles, including BS6862-1:1971. It has good overall resistance to petrol, diesel and lubricating oils. It is suitable for continuous current loads to a maximum of 8.75 Amps per cable.
The Durite 0-952-51 and 3-952-51 twin cables are commonly used as conductor wires on low-amperage 12V-24V electrical equipment.
|Twin-core standard automotive wiring
|Red and Black
|1.00mm² (17 AWG)
|For 12 and 24 Volts DC systems (100 Volts DC Max.)
|18.9mΩ/m at 20℃
|Hard-grade PVC offers good resistance to abrasion and cut-through.
|Overall Outside Measurement
|6.5mm x 4.00mm
|Minus 30 to +70℃
|Length of Cable
|30 and 100 Metre roll options