| 
Need help? Email us: sales1@arc-components.com

SW60-236MP Albright 24V DC IP66 80A Magnetically Latched Solenoid - Intermittent

SW60-236MP Albright 24V DC IP66 80A Magnetically Latched Solenoid - Intermittent
SW60-236MP Albright 24V DC IP66 80A Magnetically Latched Solenoid - Intermittent
SW60-236MP Albright 24V DC IP66 80A Magnetically Latched Solenoid - Intermittent
SW60-236MP Albright 24V DC IP66 80A Magnetically Latched Solenoid - Intermittent
£25.96 Excl. VAT
(£31.15 Inc. VAT)
Earn 25 Loyalty Points
   
No stock
Model
SW60-236MP
Bar Code
DNA
Part Number
SW60-236MP
Brand
Albright
Colour
Black
Voltage
24V DC
Amperage
80A
Material
Copper/Silver/Bakelite
Coil type
Intermittent
IP Protection
IP66
Ship Weight
240 g
 

 Pre-orders and back-ordering are available for all Albright brand out-of-stock items, with a current lead time of approximately 8 to 10 weeks despatch.

  • Ordering more Albright brand products than is shown in stock will put your order into a backorder process.
  • Request "Ship all available" in the order comments section if you order more units than are available.

 Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.


 Albright SW60-236MP IP66 sealed 24Vdc miniature single-acting magnetically latched contactor with a top hat bracket, intermittent.

  • Albright SW60 series contactors are designed for a compact DC contactor application and used for switching or reversing small traction motors, hydraulic power packs, small electric winch motors, etc.
  • These contactors have closed contact housings and are sealed to inhibit the ingress of moisture or other contamination, used in environments that require protection to IP66.
  • All contactor builds are to very high standards and employ the best quality materials: phenolic contact housings, Silver-alloy contacts and class H (180℃) winding wire for the coils.
  • Repair kit: not available on this unit.
  • Magnetically latched contactor.
  • Yellow warning label fitted.
  • Red "+" Positive label fitted under left-hand coil terminal.

Dimensions

  • Height, including terminals and coil base cap: 81.4mm.
  • Coil width: 35.9mm.
  • Cap width: 35.9mm.
  • Depth: 32.8mm.

About Intermittent (Int.) SW60 Magnetically Latched Solenoids

 Intermittent contactors, by design, are predominantly for hydraulic functions on vehicles; they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.

 Magnetic Latching: The contact position is secured with the use of a permanent magnet within the coil assembly. The coil requires a pulse(~500ms) to close the contacts, and a reverse polarity pulse (~500ms) to operate the armature and open the contacts, but otherwise remains in the last energised state without the need for power. It should be noted, therefore these are not failsafe.

 The SW60P features single pole double-breaking main contacts with Silver-alloy tips, which are weld-resistant, hardwearing and have excellent conductivity. The SW60P incorporates an enclosed top cover and offers environmental protection to IP66. The SW60P has M6 stud main terminals and 6.3mm spade coil connections. It can be mounted via mounting brackets (supplied fitted).

Interrupted Current: The opening and closing on load with frequent switching (resulting in increased contact resistance).
Uninterrupted Current: No or infrequent load switching requirements (maintains a lower contact resistance).

Specifications

Device Type
Latched - SP - ST
Voltage
24V D.C.
Coil Type
Intermittent
Amps
80A
Coil Resistance (Ohms)
50
Pull In Voltage (V)
17.0 Max.
Drop Out Voltage (V)
17.0 Max.
Coil Power Dissipation (W)
11.52
Typical Pull-In Time
15ms
Typical Voltage Drop Per Pole
Across New Contacts At 80A
< 40mV
Operating Ambient Temperature
-40 to +60℃
Protection
IP66
Guideline Weight
210g
Application
Uninterrupted
Thermal Current Rating
80A
Intermittent Current Rating
 
30% Duty
145A
40% Duty
125A
50% Duty
115A
60% Duty
105A
70% Duty
95A

 


Delivery
 
UK Mainland Postage

Delivery Options Our Free UK Mainland Postage and Packaging Service offers unbeatable value for money. The free UK Standard shipping is automatically applied to your shopping cart page with no additional cost when you reach the £50.00 minimum order value.

 We use Royal Mail Standard or Recorded Delivery for light, low-value orders and we use FedEx, UPS, Parcel Force, and other major courier services for larger and more valuable consignments.

 
International Consignments

 Our international customers will need to provide the exact Card Holder Address (Invoicee) as the first address for payment processing. Please note that PO Box addresses are not acceptable as delivery addresses by some couriers. All export orders must be placed and paid for online. Proforma Bank Transfer IBAN and SWIFT payment methods are available to create online.

Also Bought

Customer Feedback (0)
Leave a Review