0-932-25 100m x 1.00mm˛ Blue-Red 16.5A Auto Single Core Cable
Weight: 1.28 kg
Bar Code: 5056119131666
Part Number: 0-932-25
Single core, 1mm² thin wall automotive blue with a red tracer PVC sheathed electric cable.
- Length: 100m.
- 1.00mm² blue-red (blue cable, red stripe).
- 16.5A automotive single core cable.
- 32 Strand 0.20mm.
- Outside diameter: 2.1mm.
- To ISO 06722-4.
About the 1mm² Blue and Red Thin Wall Electric Cable
100 Metre rolls of light duty 16.5A blue with a red tracer line auto electrical thin wall cable, used for light current loads; thin wall configuration increases current load capabilities to a maximum of 16.5 amps continuous. With a reduced but harder PVC coating, thin wall cabling is modern by design and adopted for wiring looms and trees with modern vehicle manufacturers. Durite thin wall electrical cable manufactured to ISO 6722-4 industry standards, reduces the weight and volume of vehicles cable looms and has good overall resistance to petrol, diesel and lubricating oils.
Used as a conductor wire on low amperage electrical equipment and wiring looms.
|Type ||Single core thin wall cable |
|Current Rating ||16.5 amp |
|Insulation colour ||Blue with a red tracer line |
|Wire ||32/0.20mm copper |
|Cross section ||1.00mm² |
|Voltage ||60 volt DC maximum |
|Resistance ||18.5mΩ/m at 20℃ |
|Insulation ||Hard grade PVC to BS6746 Type 5. |
|Overall diameter ||2.1mm |
|Temperature ||Minus 40 to +105℃ |
|Length of cable ||100 Metres |
|Approvals ||ISO6722/4 |
|Weight ||1.27Kg |
Free UK Mainland Postage and Packaging
Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.
International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
Export orders will only be accepted when placed online.