SW80AB-1894 Albright 24Vdc Single-acting Solenoid Contactor - Prolonged

 Albright SW80AB-1894 24Vdc single-acting solenoid contactor with auxiliary microswitch and magnetic blowouts, prolonged (PO).

• The SW80 series of contactors has been designed for direct current loads, particularly motors as used on small electric vehicles such as light industrial trucks, powered invalid cars, etc.; they have double-breaking contacts with Silver-alloy contact tips, which are weld resistant, hardwearing and have excellent conductivity.
• They are economical in price and compare favourably with sealed automotive-style solenoid switches, which cannot be serviced or inspected for contact wear.
• Repair contact kit part number: 2070-57.
• Auxiliary switch kit (fitted) part number: 2070-124.

Dimensions (Contactor only)

• Height including terminals and coil base cap:94mm.
• Coil width: 41mm.
• Cap width: 50.5mm.
• Cap depth: 39mm.

Magnetic Blowouts

 These contactors are of double break configuration and are fitted with magnetic blowouts (denoted by the 'B' suffix in the SW80 range) across both contact gaps. These enable high currents to be ruptured very quickly so that arcing time is reduced to a minimum. The fitting of blowouts makes the contacts polarity sensitive and the Positive markings on the top cover of the contactor must be observed.

About Prolonged (PO) SW80 Solenoids

 Prolonged use for up to 90% duty cycle, up to 54 minutes of continuous energisation. The coil is more powerful than continuous and weaker than intermittent equivalent. The return spring is stronger than continuous but weaker than intermittent.

 The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via M4 tapped holes or by steel mounting brackets (supplied as separate items). Mounting can be horizontal or vertical. When vertical, the M8 contact studs should point upwards.

Specifications