SW80-390P Albright Single Acting Solenoid Contactor 12V Continuous IP66

£30.70  Excl. VAT
  (£36.84 Inc. VAT)


Earn 30 Loyalty Points
4 in stock
 

Weight:  400g


Model:  SW80-390P
Bar Code:  DNA
Part Number:  SW80-390P
Brand:  Albright
Colour:  Black
Voltage:  12V DC
Amperage:  100A
Material:  Copper/Silver/Bakelite
Coil type:  Continuous

Pre-order and back-ordering are available with a 6 to 8 week lead time. Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.


 SW80-390p single acting solenoid contactor 12V continuous.

  • Sealed to IP66 for weatherproofing and are suitable for marine internal application.
  • The SW80 series of contactors has been designed for direct current loads, particularly motors as used on small electric vehicles such as light industrial trucks, powered invalid cars, etc., they have double breaking contacts with silver alloy contact tips, which are weld resistant, hardwearing and have excellent conductivity.
  • They are economical in price and compare favourably with sealed automotive style solenoid switches.
  • Repair contact kits are not available for this unit due to the weatherproofing.

Dimensions

  • Height including terminals and coil base cap: 94mm.
  • Coil width: 41mm.
  • Cap width: 50.5mm.
  • Cap depth: 39mm.

About Continuous (CO.) SW80P Solenoids

 Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 The SW80P features an enclosed top cover and offers environmental protection to IP66. The SW80P has M8 stud main terminals and 6.3mm spade coil connections. Mounted using supplied brackets, mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.

Interrupted current - opening and closing on load with frequent switching (results in increased contact resistance).
Uninterrupted current - no or infrequent load switching requirements (maintains a lower contact resistance).

Specifications

Device Type SW80P SPST NO
Voltage 12V D.C.
Coil Type Continuous
Amps 100 amp
Coil Power Dissipation 7 - 13 Watts
Typical Pull-In Time 20ms
Typical Voltage Drop Per Pole
Across New Contacts At 100A
Less than 40mV
Operating Ambient Temperature -40 to +60℃
Protection IP66
Weight 390g
Application Interrupted Uninterrupted
Thermal Current Rating 100A 125A
Intermittent Current Rating:
30% Duty 185A 230A
40% Duty 160A 200A
50% Duty 140A 175A
60% Duty 130A 160A
70% Duty 120A 150A

 

Free UK Mainland Postage and Packaging

Delivery Options Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
 Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.

International Consignments

 International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
 Export orders will only be accepted when placed online.

2070-983A Albright SW80 Solenoid Curved Mounting Bracket
2070-983A Albright SW80 Solenoid Curved Mounting Bracket

SW80 and SU80 Single acting solenoid bracket, for mounting SW80 solenoids to curved panels, motors or machines.

52 in stock
 Reference: 2070-983A £1.73
2070-57 Albright SW80 Series Contact Kit
2070-57 Albright SW80 Series Contact Kit

Albright SW80 series contact kit, consists of: 1 x moving contact and 2 x contact studs with nuts and washers, with silver alloy contact tips.

7 in stock
 Reference: 2070-57 £10.44
DC88-499PL Albright 12V DC Motor Reversing Solenoid Intermittent 100A IP66
DC88-499PL Albright 12V DC Motor Reversing Solenoid Intermittent 100A IP66

The DC88-499PL contactors have been designed for direct current loads, particularly motors as used on small electric vehicles.

3 in stock
 Reference: DC88-499PL £72.63


Featured Products
0-534-10 Durite 12V-24V Red LCD Battery Voltage Monitor
0-534-10 Durite 12V-24V Red LCD Battery Voltage Monitor

12V or 24V LED style battery monitor. Panel or bracket mounted gauge with 6.3mm terminals and fits into a 28mm socket.

Available
 Reference: 0-534-10 £20.34   £17.29

0-564-02 12V to 48V Reversing Alarm 97dB(A) at 1200Hz
0-564-02 12V to 48V Reversing Alarm 97dB(A) at 1200Hz

Multi-voltage 12-48V reverse/back up alarm, 97dB(A) at 1200Hz, 60 pulses per minute, two position fixing bracket, CE approved.

Available
 Reference: 0-564-02 £24.74   £21.03

SW60-37P Albright 12V DC IP66 Sealed Miniature Solenoid Intermittent 80A
SW60-37P Albright 12V DC IP66 Sealed Miniature Solenoid Intermittent 80A

Albright SW60-37P 12V intermittent contactor, designed for a compact DC application, used as a line switch on electric vehicles.

12 in stock
 Reference: SW60-37P £16.00
Recently Viewed
NATO NCAGE Supplier Code: U07T3  |  Need help? Email us: sales1@arc-components.com
Arc-Components.com
UK ISO9001 Auto Electrical Parts Specialists