SW80-2187P Albright 48Vdc Solenoid Contactor Sealed to IP66 - Prolonged

 Albright SW80-2187P single-acting solenoid contactor, 48Vdc prolonged and sealed to IP66.

• Sealed to IP66 for weatherproofing and are suitable for internal marine applications.
• The SW80 series of contactors has been designed for direct current loads, particularly motors as used on small electric vehicles such as light industrial trucks, powered invalid cars, etc. They have double-breaking contacts with Silver-alloy contact tips, which are weld resistant, hardwearing and have excellent conductivity.
• They are economical in price and compare favourably with sealed automotive-style solenoid switches.
• Repair contact kits are not available for this unit due to the weatherproofing.
• Integral mounting bracket moulded into bottom cover.
• 1N4007 diode fitted.

Dimensions

• Height, including terminals and coil base cap: 94mm.
• Coil width: 41mm.
• Cap width: 50.5mm.
• Cap depth: 39mm.

About Prolonged (PO.) SW80P Solenoids

 Prolonged use for up to 90% duty cycle, up to 54 minutes of continuous energisation. The coil is more powerful than continuous and weaker than the intermittent equivalent. The return spring is stronger than continuous but weaker than intermittent.

 The SW80P features an enclosed top cover and offers environmental protection to IP66. The SW80P has M8 stud main terminals and 6.3mm spade coil connections. Mounted using supplied brackets, mounting can be horizontal or vertical. When vertical, the M8 contact studs should point upwards.

Specifications