SU285-15P Albright Single Acting Normally Closed Solenoid 24V Continuous
Despatch: 9 to 12 Weeks
Weight: 1.28 kg
Bar Code: DNA
Part Number: SU285-15P
Voltage: 24V DC
Coil type: Continuous
Pre-order and back-ordering are available with a current 9 to 12 week lead time. Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.
Albright SU285 single acting 'Normally Closed' 24V continuously rated contactor.
- The SU285 series of contactors has been designed for direct current loads, particularly motors as used on larger electric vehicles such as industrial trucks, airport tractors, etc., they have double breaking contacts with silver alloy contact tips, which are weld resistant, hardwearing and have excellent conductivity.
- Repair contact kits are not available for this unit.
- The SU285P offers greater environmental protection (IP66) and is easy to install.
- Height including terminals and coil base cap: 133mm.
- Coil width: 48mm.
- Cap width: 67mm.
About the Normally Closed Continuous (CO.) SU285 Solenoids
Normally closed continuous contactors by design are for an ‘Always On’ line function and break only when the coil is energised, they break slower than intermittent solenoids and are recommended for prolonged contact periods.
|Device Type ||SU280 SPST NC |
|Voltage ||24V D.C. |
|Coil Type ||Continuous |
|Amps ||250 Amps |
|Coil Resistance (Ohms) ||44 |
|Pull-In Voltage (V) ||16.0 Maximum |
|Drop Out Voltage (V) ||6.0 Maximum |
|Coil Power Dissipation (W) ||13.09 |
|Typical Voltage Drop Per Pole |
across New Contacts at 250A
|Operating Ambient Temperature ||-40 to +60℃ |
|Mechanical M.T.B.F. ||Greater than 3000000 |
|Weight ||755g |
|Application ||Interrupted ||Uninterrupted |
|Thermal Current Rating ||250A ||350A |
|Intermittent Current Rating: |
|30% Duty ||455A ||640A |
|40% Duty ||395A ||555A |
|50% Duty ||355A ||495A |
|60% Duty ||325A ||450A |
|70% Duty ||300A ||420A |
Free UK Mainland Postage and Packaging
Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.
International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
Export orders will only be accepted when placed online.