ED300LB-3 Albright Heavy Duty Emergency Stop Switch 300A 96V Maximum

£54.82  Excl. VAT
  (£65.78 Inc. VAT)


Earn 54 Loyalty Points
1 in stock
Immediate despatch.

Weight:  600g


Model:  ED300LB-3
Part Number:  ED300LB-3
Brand:  Albright
Colour:  Black/Red
Voltage:  12V to 96V DC
Amperage:  300A
Material:  Copper/Silver/Bakelite

Pre-order and back-ordering are available with a 6 to 8 week lead time. Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.


 The Albright ED300LB range of switches has been designed to provide a rapid means of disconnecting batteries or other power supplies in the event of serious electrical faults. Whilst the switches are primarily intended for use with battery powered vehicles they are also suitable for use with static power systems. All types are capable of safely rupturing full load battery currents in the event of an emergency.

  • Rated: 300A, 12V, 24V, 48V, 72V and 96V DC maximum.
  • Single pole, single throw.
  • Two M5 fixing screws at 48mm centres.
  • Two M8 hex bolts for battery cable fixing.
  • Supplied with 2 keys.
  • Suitable for voltages up to 96 volt dc, commonly used on 12 volt, 24 volt, 48 volt and 72 volt dc electric vehicle systems.
For a lockable version use ED300LB-3

Magnetic Blowouts

 This unit is fitted with magnetic blowouts, the polarity marked on the contact housing must be observed when connecting the main terminals.

About The Albright ED300LB-3 Stop Switches

 The ED300B is a manually operated device with an over-center spring mechanism which provides a snap action for both opening and closing of the main contacts. The ED300 is easy to install and is secured with supplied M5 Posidrive mounting screws.

 This lockable version features a key which is necessary for the knob to be moved from the “Off” position to the “On” position. Once in the “On” position, the key can be removed. Thereafter, the knob may be depressed to the “Off” position where it will automatically lock and remain locked until the key is used again to unlock it.

 Ensure that the switches are installed in a position where heavy arcs emanating from the switch cannot damage or electrically jump across to adjacent parts. The switch is to be used to rupture current in an emergency or as a no-load isolator.

 A typical comment regarding its big red button appearance is that it is obnoxious, a very apt description, when you need to kill a circuit in an emergency you need the button to be obvious and obnoxious, many OEM's would agree, and will fit the Albright emergency switchgear as standard equipment.

Specifications

Application  
Device Type ED300LB-3 SPST Emergency Stop Switch
Thermal Current Rating (Ith) 300 amp
Intermittent Current Rating 30% Duty 550A
40% Duty 475A
50% Duty 425A
60% Duty 385A
70% Duty 360A
Overload Currents
that can be Ruptured
1000A at 96V D.C.
Maximum Recommended
Contact Voltage
96V D.C.
Mechanical MTBF 10000 Operations
Typical Voltage Drop Per Pole
Across New Contacts At 100A
30mV
Operating Ambient Temperature -40 to +60℃
Weight 500g

 

Free UK Mainland Postage and Packaging

Delivery Options Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
 Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.

International Consignments

 International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
 Export orders will only be accepted when placed online.


NATO NCAGE Supplier Code: U07T3  |  Need help? Email us: sales1@arc-components.com
Arc-Components.com
UK ISO9001 Auto Electrical Parts Specialists