Durite single-core PVC thin wall 70A automotive cable.
- 10.00mm² (7AWG) Red.
- 70A single-core automotive cable and vehicle wiring.
- 80 strands 0.40mm.
- Outside diameter: 6.0mm.
- To ISO 6722-1:2011.
- Roll length 30m.
About the 0-940-05 10.00mm² Red Thin Wall Electric Cable
Arc Components Limited presents the 0-940-05 Durite 70A Red automotive "Thin Wall" cable, which is ideal for your vehicle battery connections close to the battery source like starter motors, alternators and additional electrical equipment with a high-load requirement.
This high-quality PVC sheathed, copper-cored electrical wire is supplied on a 30m cardboard reel, perfect for storage in your van or workshop ready use wiring racks. It is 10mm² and features 80 strands of 0.40mm separate copper wires bound together in a PVC sleeve, with an outside diameter of 6mm. It meets all necessary standards for domestic and commercial vehicles' electrical equipment wiring, including ISO6722/4, reduces the weight and volume of vehicle cable looms and has good overall resistance to petrol, diesel and lubricating oils. It is suitable for high-amperage heavy current loads to a maximum load of 70 Amps continuous.
Used as a Positive (+) conductor on auto electrical equipment and wiring looms.
|Type ||Single core thin wall cable |
|Current Rating ||70 Amps |
|Insulation Colour ||Red |
|Wire ||80/0.40mm copper |
|Cross section ||10.0mm² (7 AWG) |
|Voltage ||60 Volts DC maximum |
|Resistance ||1.82mΩ/m at 20℃ |
|Insulation ||Hard-grade PVC that offers good resistance to abrasion and cut-through. |
|Overall Diameter ||6.0mm |
|Temperature ||Minus 40 to +105℃ |
|Length of Cable ||30 Metres |
|Approvals ||ISO6722-1:2011 |
|Weight ||3.2Kg |