SW80-122 Albright Single-acting Solenoid Contactor 40V Continuous

£37.90  Excl. VAT
  (£45.48 Inc. VAT)
 Excl. VAT

Earn 37 Loyalty Points
Pre-order
Despatch: 9 to 12 Weeks

Weight:  350 g


Model:  SW80-122
Bar Code:  DNA
Part Number:  SW80-122
Brand:  Albright
Colour  Black
Voltage  40V DC
Amperage  100A
Material  Copper/Silver/Bakelite
Coil type  Continuous

Pre-order and back-ordering is available with a current 9 to 12 weeks despatch. Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.


 Albright SW80-122 single-acting solenoid contactor, 40Vdc continuous.

  • The SW80 series of contactors has been designed for direct current loads, particularly motors as used on small electric vehicles such as light industrial trucks, powered invalid cars, etc., they have double-breaking contacts with Silver-alloy contact tips, which are weld resistant, hardwearing and have excellent conductivity.
  • They are economical in price and compare favourably with sealed automotive style solenoid switches which cannot be serviced or inspected for contact wear.
  • Repair contact kit part number: 2070-57.
  • Auxiliary switch kit part number: 2070-124.

Dimensions

  • Height including terminals and coil base cap: 94mm.
  • Coil width: 41mm.
  • Cap width: 50.5mm.
  • Cap depth: 39mm.

About Continuous (CO.) SW80 Solenoids

 Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via M4 tapped holes or by steel mounting brackets (supplied as separate items). Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.

Interrupted Current: The opening and closing on load with frequent switching (resulting in increased contact resistance).
Uninterrupted Current: No or infrequent load switching requirements (maintains a lower contact resistance).

Specifications

Device Type SPST NO
Voltage 40V D.C.
Coil Type Continuous
Amps 100 Amps
Coil Resistance (Ohms) 120
Pull-In Voltage (V) 22.0 Max.
Drop Out Voltage (V) 10.0 Max.
Coil Power Dissipation (W) 10.87
Typical Pull-In Time 20ms
Typical Voltage Drop Per Pole
Across New Contacts At 100A
< 40mV
Operating Ambient Temperature -40 to +60℃
Weight 350g
Application Interrupted Uninterrupted
Thermal Current Rating 100A 125A
Intermittent Current Rating:
30% Duty 185A 230A
40% Duty 160A 200A
50% Duty 140A 175A
60% Duty 130A 160A
70% Duty 120A 150A

 

Free UK Mainland Postage and Packaging

Delivery Options Our Free UK Mainland Postage and Packaging Service offers unbeatable value for money. The free UK Standard shipping is automatically applied to your shopping cart page with no additional cost when you reach the £50.00 minimum order value.
We use Royal Mail Standard or Recorded Delivery for light, low-value orders and we use UPS, Parcel Force, and other major courier services for larger and more valuable consignments.

International Consignments

 Our international customers will need to provide the exact Card Holder Address (Invoicee) as the first address for payment processing. Please note that PO Box addresses are not acceptable as delivery addresses by some couriers. All export orders must be placed and paid for online. Proforma Bank Transfer IBAN and SWIFT payment methods are available to create online.


Featured Products
0-005-29 Pack of 50 6.30mm Female Terminal for Cable 2.50mm˛ to 4.00mm˛
0-005-29 Pack of 50 6.30mm Female Terminal for Cable 2.50mm˛ to 4.00mm˛

6.30mm push-on female terminals with a high current shoe. For 2.50mm² to 4.00mm² automotive cables and vehicle wiring.

Available
 Reference: 0-005-29 £15.84   £14.10

0-740-74 Durite 12V Pre-programmed Timer Off Relay 6 Second Delay
0-740-74 Durite 12V Pre-programmed Timer Off Relay 6 Second Delay

Durite 12Vdc 6 seconds programmed PIC controlled timer relays. "Timer off" delay function gives a timed response before switching the load.

Available
 Reference: 0-740-74 £70.40   £62.66

SU280-1002 Albright Single-acting 12V 250A Contactor - Continuous
SU280-1002 Albright Single-acting 12V 250A Contactor - Continuous

SU280-1002 12Vdc 250A single-acting contactor, continuous. 12 Volts DC 250 Amps single-pole, single-throw SPST solenoid.

3 in stock
 Reference: SU280-1002 £64.03
Recently Viewed
NATO NCAGE Supplier Code: U07T3  |  Need help? Email us: sales1@arc-components.com
Arc-Components.com
UK ISO9001 Auto Electrical Parts Specialists