SW180B-524 Albright Single-acting Solenoid Contactor 80V - Prolonged

 Albright SW180B-524 80Vdc 150 Amps single-acting solenoid contactor, prolonged.

• The SW180B series of contactors has been designed for direct current loads, particularly motors as used on small electric vehicles such as industrial trucks, airport tractors, etc., they have double-breaking contacts with Silver-alloy contact tips, which are weld resistant, hardwearing and have excellent conductivity.
• The contactors are compact in size and are fully serviceable, with a range of spare parts available.
• Repair contact kit part number: 2180-42.
• Auxiliary switch kit part number: 2180-796.
• Mounting bracket available: 2159-47.

Dimensions

• Height including terminals and coil base cap: 122mm.
• Coil width: 45mm.
• Cap width: 61mm.
• Cap depth: 45mm.

Magnetic Blowouts

 These contactors are of double break configuration and are fitted with magnetic blowouts (denoted by the 'B' suffix in the SW180B range) across both contact gaps. These enable high currents to be ruptured very quickly so that arcing time is reduced to a minimum. The fitting of blowouts makes the contacts polarity sensitive and the positive markings on the top cover of the contactor must be observed.

About Continuous (CO.) SW180B Solenoids

 Prolonged use for up to 90% duty cycle, up to 54 minutes of continuous energisation. The coil is more powerful than continuous and weaker than intermittent equivalent. The return spring is stronger than continuous but weaker than intermittent.

 The SW180B has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks. Developed for both interrupted and uninterrupted loads, the SW180B is suitable for switching Resistive, Capacitive and Inductive loads.

 The SW180B features single-pole, single-throw, double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW180B has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or steel mounting brackets (supplied as separate items). Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.

Specifications