SU280-1678T Albright Single-acting 24V 250A Contactor - Continuous

£76.41  Excl. VAT
  (£91.69 Inc. VAT)
 Excl. VAT

Earn 76 Loyalty Points
Pre-order
Despatch: 9 to 12 Weeks

Weight:  750 g





Model:  SU280-1678T
Bar Code:  DNA
Part Number:  SU280-1678T
Brand:  Albright
Colour:  Black
Voltage:  24V DC
Amperage:  250A
Material:  Copper/Silver/Bakelite/Steel
Coil type:  Continuous

Pre-order and back-ordering is available for all Albright out-of-stock items, with a current 9 to 12 weeks despatch.
Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.


 Albright SU280-1678T 24 Volts DC single-acting 250 Amps solenoid contactor with textured tips, continuous.

  • The SU280 series of contactors has been designed for direct current loads, particularly motors as used on small electric vehicles such as industrial trucks, airport tractors, etc.; they have double-breaking contacts with Silver-alloy contact tips, which are weld resistant, hardwearing and have excellent conductivity.
  • Textured tips fitted throughout.
  • 2159-47 bracket fitted on the right-hand side of the coil terminals.

Associated Products

  • 2155-352 Auxiliary switch kit.
  • 2159-47 Mounting bracket.
  • 2155-165 Mounting bracket.
  • 2159-167A Mounting bracket.

Dimensions

  • Height, including terminals and coil base cap: 132mm.
  • Coil width: 45mm.
  • Cap width: 67mm.
  • Cap depth: 47mm.

About Continuous (CO.) SU280 Solenoids

 Continuous contactors, by design, are predominantly used for drive functions on vehicles; they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 The contactors have double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity. They are easy to install, with M5 tapped holes in the switch frame together with a range of available mounting brackets. Mounting can be vertical or horizontal. When vertical, the M10 contact studs should point upwards.

Interrupted Current: The opening and closing on load with frequent switching (resulting in increased contact resistance).
Uninterrupted Current: No or infrequent load switching requirements (maintains a lower contact resistance).

Specifications

Device Type NO - SP - ST
Voltage 24V D.C.
Coil Type Continuous
Amps 250 Amps
Coil Resistance (Ohms) 44
Pull-In Voltage (V) 16.0 Max.
Drop Out Voltage (V) 6.0 Max.
Coil Power Dissipation (W) 13.09
Typical Pull-In Time 30ms
Typical Voltage Drop Per Pole
Across New Contacts At 100A
40mV
Operating Ambient Temperature -40 to +60℃
Weight 755g
Application Interrupted Uninterrupted
Thermal Current Rating 250A 350A
Intermittent Current Rating:
30% Duty 450A 640A
40% Duty 395A 555A
50% Duty 355A 495A
60% Duty 325A 450A
70% Duty 300A 420A

 





UK Mainland Postage Offer

Delivery Options Our Free UK Mainland Postage and Packaging Service offers unbeatable value for money. The free UK Standard shipping is automatically applied to your shopping cart page with no additional cost when you reach the £50.00 minimum order value.
We use Royal Mail Standard or Recorded Delivery for light, low-value orders and we use UPS, Parcel Force, and other major courier services for larger and more valuable consignments.

 
 
 
International Consignments

 Our international customers will need to provide the exact Card Holder Address (Invoicee) as the first address for payment processing. Please note that PO Box addresses are not acceptable as delivery addresses by some couriers. All export orders must be placed and paid for online. Proforma Bank Transfer IBAN and SWIFT payment methods are available to create online.


Related Products
SU280-1002 Albright Single-acting 12V 250A Contactor - Continuous
SU280-1002 Albright Single-acting 12V 250A Contactor - Continuous

SU280-1002 12Vdc 250A single-acting contactor, continuous. 12 Volts DC 250 Amps single-pole, single-throw SPST solenoid.


2 in stock
 Reference: SU280-1002 £74.03
SU280-1004 Albright Single-acting 24V 250A Contactor - Continuous
SU280-1004 Albright Single-acting 24V 250A Contactor - Continuous

SU280-1004 24Vdc 250A single-acting contactor, continuous. 250 Amps single-pole, single-throw SPST 24 Volts DC solenoid.


1 in stock
 Reference: SU280-1004 £74.03
SU280-1010 Albright Single-acting 48V 250A Contactor - Continuous
SU280-1010 Albright Single-acting 48V 250A Contactor - Continuous

SU280-1010 48Vdc 250A single-acting contactor, continuous. 48 Volts DC 250 Amps single-pole, single-throw SPST solenoid.


Pre-order
Despatch: 9 to 12 WeeksReference: SU280-1010 £74.03
SU280-1068P Albright Single-acting 24V 250A Contactor - Continuous IP66
SU280-1068P Albright Single-acting 24V 250A Contactor - Continuous IP66

SU280-1068P single-acting IP66 protected solenoid contactor 24V continuous. 250A SPST 24-Volts solenoid.


No stock
 Reference: SU280-1068P £79.23
SU280-1072P Albright Single-acting 36V 250A Contactor - Continuous IP66
SU280-1072P Albright Single-acting 36V 250A Contactor - Continuous IP66

SU280-1072P single-acting IP66 protected solenoid contactor 36V continuous. 250A SPST 36-Volts solenoid.


Pre-order
Despatch: 9 to 12 WeeksReference: SU280-1072P £79.23
SU280-1078P Albright Single-acting 72V 250A Contactor - Continuous IP66
SU280-1078P Albright Single-acting 72V 250A Contactor - Continuous IP66

SU280-1078P single-acting IP66 protected solenoid contactor 72V continuous. 250A SPST 72-Volts solenoid.


Pre-order
Despatch: 9 to 12 WeeksReference: SU280-1078P £79.23
Featured Products
0-642-16 12V 420Hz High Tone 2 Pole Electric Horn
0-642-16 12V 420Hz High Tone 2 Pole Electric Horn

12V 420Hz high tone disc horn, 2 pole, 112dB(A), diaphragm type with passivated and painted steel body.


Available
 Reference: 0-642-16 £15.88   £14.13
  (1)

0-856-20 Durite Inverter Modified Wave 12VDC to 230VAC - 1000W
0-856-20 Durite Inverter Modified Wave 12VDC to 230VAC - 1000W

Durite's double socket inverter, modified wave 12 Volts DC to 230 Volts AC. 1000W, 230 Volts AC dual socket modified wave inverter.


Available
 Reference: 0-856-20 £293.88   £261.55

Durite 10A Red Standard Automotive Blade Fuse | Re: 0-375-10
Durite 10A Red Standard Automotive Blade Fuse | Re: 0-375-10

Durite 10 Amps automotive standard blade or spade fuse, Red. Width: 19.0mm, length including blade: 19.0mm and thickness: 5.0mm.


Available
 Reference: 0-375-10 From:  £2.03
Recently Viewed
NATO NCAGE Supplier Code: U07T3  |  Need help? Email us: sales1@arc-components.com
Arc-Components.com
UK ISO9001 Auto Electrical Parts Specialists