| 
Need help? Email us: sales1@arc-components.com

SU280-1072P Albright Single-acting 36V 250A Contactor - Continuous IP66

SU280-1072P Albright Single-acting 36V 250A Contactor - Continuous IP66
SU280-1072P Albright Single-acting 36V 250A Contactor - Continuous IP66
SU280-1072P Albright Single-acting 36V 250A Contactor - Continuous IP66
SU280-1072P Albright Single-acting 36V 250A Contactor - Continuous IP66
£79.23 Excl. VAT
(£95.08 Inc. VAT)
Earn 79 Loyalty Points
   
Pre-order
Despatch: 8 to 10 Weeks
Model
SU280-1072P
Bar Code
DNA
Part Number
SU280-1072P
Brand
Albright
Colour
Black
Voltage
36V DC
Amperage
250A
Material
Copper/Silver/Bakelite/Steel
Coil type
Continuous
Weight
750 g
 

 Pre-orders and back-ordering are available for all Albright brand out-of-stock items, with a current lead time of approximately 8 to 10 weeks despatch.

  • Ordering more Albright brand products than is shown in stock will put your order into a backorder process.
  • Request "Ship all available" in the order comments section if you order more units than are available.

 Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.


 Albright SU280-1072P single-acting 36Vdc 250 Amps solenoid contactor, protected to IP66, continuous.

  • The SU280P has been designed for direct current loads, particularly motors as used on electronic vehicles such as industrial trucks, airport tractors, etc., they have double-breaking contacts with Silver-alloy contact tips, which are weld resistant, hardwearing and have excellent conductivity.

Dimensions

  • Height including terminals and coil base cap: 132mm.
  • Coil width: 45mm.
  • Cap width: 67mm.
  • Cap depth: 47mm.

About Continuous (CO.) SU280P Solenoids

 Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 The contactors have double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SU280P offers greater environmental protection (IP66) and is easy to install, with a range of mounting brackets available. To ensure IP66, mounting holes are not accessible on the opposite side of the mounting bracket. Mounting can be vertical or horizontal, when vertical the M10 contact studs should point upwards.

Interrupted Current: The opening and closing on load with frequent switching (resulting in increased contact resistance).
Uninterrupted Current: No or infrequent load switching requirements (maintains a lower contact resistance).

Specifications

Device Type SPST NO
Voltage 36V D.C.
Coil Type Continuous
Amps 250 Amps
Coil Resistance (Ohms) 102
Pull-In Voltage (V) 24.0 Maximum
Drop Out Voltage (V) 9.0 Maximum
Coil Power Dissipation (W) 12.71
Typical Pull-In Time 30ms
Typical Voltage Drop Per Pole
Across New Contacts At 100A
40mV
Operating Ambient Temperature -40 to +60℃
Protection IP66
Weight 755g
Application Interrupted Uninterrupted
Thermal Current Rating 250A 350A
Intermittent Current Rating:
30% Duty 450A 635A
40% Duty 390A 550A
50% Duty 360A 495A
60% Duty 320A 450A
70% Duty 300A 415A

 


Delivery
 
UK Mainland Postage Offer

Delivery Options Our Free UK Mainland Postage and Packaging Service offers unbeatable value for money. The free UK Standard shipping is automatically applied to your shopping cart page with no additional cost when you reach the £50.00 minimum order value.

 We use Royal Mail Standard or Recorded Delivery for light, low-value orders and we use FedEx, UPS, Parcel Force, and other major courier services for larger and more valuable consignments.

 
International Consignments

 Our international customers will need to provide the exact Card Holder Address (Invoicee) as the first address for payment processing. Please note that PO Box addresses are not acceptable as delivery addresses by some couriers. All export orders must be placed and paid for online. Proforma Bank Transfer IBAN and SWIFT payment methods are available to create online.

Also Bought

0-139-99 20ml Tube of Anti-corrosive Compound - Kills Corrosion
0-139-99 20ml Tube of Anti-corrosive Compound - Kills Corrosion

Anti corrosive compound, kills corrosion and inhibits deterioration of terminals and metal parts on or near lead acid batteries.

Re: 0-139-99 
£3.86
Excl VAT
No stock
Durite 16-8mm Heavy-duty Tinned Copper Crimp Terminals | Re: 0-008-33
Durite 16-8mm Heavy-duty Tinned Copper Crimp Terminals | Re: 0-008-33

Pack of Durite 16-8mm heavy-duty tinned copper crimp terminals. Suitable for 16mm² battery cable.

Re: 0-008-33 
£4.27
Excl VAT
Available
Durite 25-8mm Heavy-duty Tinned Copper Crimp Terminals | Re: 0-008-43
Durite 25-8mm Heavy-duty Tinned Copper Crimp Terminals | Re: 0-008-43

Pack of Durite 25-8mm heavy-duty tinned copper crimp terminals. Suitable for 25mm² battery cable.

Re: 0-008-43 
£6.09
Excl VAT
Available

Customer Feedback (0)
Leave a Review