0-605-50 250A Rated at 24V Battery Isolator with Removable Key

£40.79  Excl. VAT
  (£48.95 Inc. VAT)
RRP:  £49.14
Savings before Cart:  £8.35
Earn 40 Loyalty Points
Available
 

Weight:  750g


Model:  0-605-50
Bar Code:  5056119119398
Part Number:  0-605-50
Brand:  Durite
Colour:  Metallic/Red/Black
Voltage:  12V/24V DC
Amperage:  250A


 Battery isolator with removable metal key.

  • Battery isolator switch with removable key and splash-proof cover.
  • Rated 250A at 24V DC (2500A for 5 seconds).
  • M10 studs.
  • Requires 24mm hole.

Associated Product

  • 0-605-55 Spare or replacement key.

Dimensions

  • Depth below panel: 74mm.
  • Fixing hole centres: 100mm.
  • Height above panel without key: 45mm, with key: 72mm.

Replacement Guide

  • Lucas: SSB111, 21939012.
  • Britax: 14204.

Specifications

Type Single pole single throw battery isolator switch
Type D1 Normally Open
Volts 24 VDC Max
Amps 250A Continuous. 2500A maximum for 5 seconds
Studs 2 x M10
Stud Tightening Torque 1.5+/- 0.1 daNm
Contact Copper
Connections Not Polarized
Protection IP65
Operating Temperature -40 to +85℃
Weight 562g
Free UK Mainland Postage and Packaging

Delivery Options Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
 Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.

International Consignments

 International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
 Export orders will only be accepted when placed online.

0-011-50 Pack of 10 Separate Superseal 1.5mm Male Terminal Pins
0-011-50 Pack of 10 Separate Superseal 1.5mm Male Terminal Pins

Separate 1.5mm Superseal male terminal pins, pack of 10, for cable 0.65mm to 1.50mm.

Available
 Reference: 0-011-50 £2.54   £2.11
0-011-52 Superseal Connector 1.5mm Male Blade Pin Housing 2 Way
0-011-52 Superseal Connector 1.5mm Male Blade Pin Housing 2 Way

Superseal 1.5mm male terminal housing. Two way cables connector supplied with seals and terminals.

Available
 Reference: 0-011-52 £2.88   £2.39
0-011-60 Pack of 10 Separate Superseal 1.5mm Female Terminal Pins
0-011-60 Pack of 10 Separate Superseal 1.5mm Female Terminal Pins

Separate 1.5mm Superseal female terminal pins, pack of 10, for cable 0.65mm to 1.50mm.

Available
 Reference: 0-011-60 £2.56   £2.12


Featured Products
Durite 10A Red Micro 2 Automotive Blade Fuse |  Re: 0-376-70
Durite 10A Red Micro 2 Automotive Blade Fuse |  Re: 0-376-70

Durite brand automotive Micro blade 10A fuses. Width: 9.1mm and length including blade: 15.3mm.

Available
 Reference: 0-376-70 From:  £3.92

Durite Add-A-Circuit Standard Blade Fuse Holder | Re: 0-376-99
Durite Add-A-Circuit Standard Blade Fuse Holder | Re: 0-376-99

Add-a-circuit standard blade fuse holder. Adds one extra fuse when used to replace fuse in the fuse box.

Available
 Reference: 5-376-99 From:  £3.97

Mega Fuse Holder for the Mega Range of Fuses | Re: 0-376-85
Mega Fuse Holder for the Mega Range of Fuses | Re: 0-376-85

Durite black Mega type fuse holder, side stackable for the Littelfuse Mega range of fuses, M8 studs.

Available
 Reference: 0-376-85 From:  £7.04
Recently Viewed
NATO NCAGE Supplier Code: U07T3  |  Need help? Email us: sales1@arc-components.com
Arc-Components.com
UK ISO9001 Auto Electrical Parts Specialists