0-523-08 Durite Non Illuminated 10V to 86V Engine Hour Counter
Bar Code: 5056119115659
Part Number: 0-523-08
Voltage: 10V to 86V DC
Durite 10V to 86V engine hour counter.
- Matt black bezel and white figures.
- Requires 52mm dashboard hole.
- Bridge type fitting.
- 75mm deep.
- Non illuminated.
Fitting Instructions For Translation
- Choose a suitable location for the gauge with adequate access to the rear of the gauge for connections and fixings.
- Switch off the ignition and remove the key. Disconnect battery (earth terminal first). Note: Before disconnecting battery make sure all system startup codes are known, i.e. coded radios etc.
- Cut a 51mm diameter hole at the chosen location for the gauge. Push the gauge into the hole and fit the "U" bracket over mounting studs at the rear of the gauge. Fit washer(s) and nut to each stud. Align gauge and tighten nuts.
- Connect the terminal marked "+" to a suitable ignition controlled fused supply and connect the terminal marked "-" to earth or negative feed.
- Check that all connections are correct and secure. Reconnect battery (earth terminal last). Start engine and check that the hour meter registers.
Free UK Mainland Postage and Packaging
Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.
International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
Export orders will only be accepted when placed online.