| 
Need help? Email us: sales1@arc-components.com

SW84-2 Albright Single-pole Double-throw Solenoid 12V Continuous

SW84-2 Albright Single-pole Double-throw Solenoid 12V Continuous
SW84-2 Albright Single-pole Double-throw Solenoid 12V Continuous
SW84-2 Albright Single-pole Double-throw Solenoid 12V Continuous
SW84-2 Albright Single-pole Double-throw Solenoid 12V Continuous
£49.22 Excl. VAT
(£59.06 Inc. VAT)
Earn 49 Loyalty Points
   
No stock
Model
SW84-2
Bar Code
DNA
Part Number
SW84-2
Brand
Albright
Colour
Black
Voltage
12V DC
Amperage
100A
Material
Copper/Silver/Bakelite
Coil type
Continuous
Weight
480 g
 

 Pre-orders and back-ordering are available for all Albright brand out-of-stock items, with a current lead time of approximately 8 to 10 weeks despatch.

  • Ordering more Albright brand products than is shown in stock will put your order into a backorder process.
  • Request "Ship all available" in the order comments section if you order more units than are available.

 Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.


 Albright SW84-2 12Vdc single-pole, double-throw solenoid contactor, continuous.

  • The SW84-2 has been designed for 12V direct current (DC) loads, including motors on electric vehicles such as industrial trucks. Developed for both interrupted and uninterrupted loads, the SW84 is suitable for switching Resistive, Capacitive and Inductive loads.
  • They are economical in price and compare favourably with sealed automotive-style solenoid switches, which cannot be serviced or inspected for contact wear.

Associated Products

  • 2070-193 Service or repair contact kit.
  • 2070-124 Auxiliary microswitch kit.
  • 2126-48A Mounting bracket.

Dimensions

  • Height, including terminals and coil base cap: 91mm.
  • Coil width: 40mm.
  • Cap width: 39mm.
  • Coil and cap depth, including fixed contact bars: 58mm.

About Continuous (CO.) SW84-2 Solenoids

 Continuous contactors, by design, are predominantly for drive functions on vehicles; they switch slower than intermittent solenoids and are recommended for prolonged contact periods.

 The SW84 has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or mounting brackets purchased as separate items. Mounting can be horizontal or vertical; when vertical, the M8 contact studs should point upwards. Please note Normally Closed contacts are not suited to make and break load.

Interrupted Current: The opening and closing on load with frequent switching (resulting in increased contact resistance).
Uninterrupted Current: No or infrequent load switching requirements (maintains a lower contact resistance).

Specifications

Device Type NO - SP - DT
Voltage 12V D.C.
Coil Type Continuous
Amps 100 Amps
Coil Resistance (Ohms) 14
Pull-In Voltage (V) 8.0 Max.
Drop Out Voltage (V) 3.5 Max.
Coil Power Dissipation (W) 10.29
Typical Pull-In Time 20ms
Typical Voltage Drop Per Pole
Across New Contacts At 100A
NO: < 40mV
NC: < 50mV
Operating Ambient Temperature -40 to +60℃
Weight 430g
Application Interrupted Uninterrupted
Thermal Current Rating 100A 125A
Intermittent Current Rating:
30% Duty 185A 230A
40% Duty 160A 200A
50% Duty 140A 175A
60% Duty 130A 160A
70% Duty 120A 150A

 


Delivery
 
UK Mainland Postage Offer

Delivery Options Our Free UK Mainland Postage and Packaging Service offers unbeatable value for money. The free UK Standard shipping is automatically applied to your shopping cart page with no additional cost when you reach the £50.00 minimum order value.

 We use Royal Mail Standard or Recorded Delivery for light, low-value orders and we use FedEx, UPS, Parcel Force, and other major courier services for larger and more valuable consignments.

 
International Consignments

 Our international customers will need to provide the exact Card Holder Address (Invoicee) as the first address for payment processing. Please note that PO Box addresses are not acceptable as delivery addresses by some couriers. All export orders must be placed and paid for online. Proforma Bank Transfer IBAN and SWIFT payment methods are available to create online.

Also Bought

2070-29 Albright Top Cranked Copper Link Bar

Albright International SW88 solenoid top cover copper link bar, suitable for the smaller Albright range of SW88 contactors.

Re: 2070-29 
£4.46
Excl VAT
6 in stock
2126-48A Albright SW80 and SW82 Solenoid Mounting Bracket

Albright SW80 and SW82 single-acting solenoid bracket. Designed for mounting SW80 and SW82 solenoids to panels or bulkheads.

Re: 2126-48a 
£2.20
Excl VAT
31 in stock

Customer Feedback (0)
Leave a Review