SW822-54P Albright Paired Double Pole Single Throw Solenoid 24V Continuous - IP66

£89.58  Excl. VAT
  (£107.50 Inc. VAT)


Earn 89 Loyalty Points
Pre-order
Despatch: 6 to 8 Weeks

Weight:  960g


Model:  SW822-54P
Part Number:  SW822-54P
Brand:  Albright
Colour:  Black
Voltage:  24V DC
Amperage:  100A
Material:  Copper/Silver/Bakelite
Coil type:  Continuous

Pre-order and back-ordering are available with a 6 to 8 week lead time. Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.


 Albright's SW822-54P strapped pair, 24 volt 100A, continuous use, DPST normally open switch contactor.

  • The SW822P has been designed for Motor Reversing applications with direct current loads, particularly motors as used on electric vehicles such as industrial trucks.
  • Developed for both interrupted and uninterrupted loads, the SW822P is suitable for switching Resistive, Capacitive and Inductive loads.
  • Supplied with mounting bracket.
  • Due to the sealed nature of these units, no service or repair kits are available.

Dimensions

  • Base plate to top of brass studs (height): 94mm.
  • Body length excluding mounting bracket: 97mm.
  • Depth: 58mm including bracket.
  • Main terminal studs: M8.

About Continuous (CO.) SW822-54P Solenoids

 Continuous contactors by design are predominantly for drive functions on vehicles, they switch slower than intermittent solenoids and are recommended for prolonged contact periods.

 The SW822P features double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity. The SW822P features an enclosed top cover and offers environmental protection to IP66.

 The SW822P has M8 stud main terminals and 6.3mm spade coil connections. Mounted using supplied brackets, mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.

Interrupted current - opening and closing on load with frequent switching (results in increased contact resistance).
Uninterrupted current - no or infrequent load switching requirements (maintains a lower contact resistance).

Specifications

Device Type SW822 Paired DPST NO
Voltage 24V D.C.
Coil Type Continuous
Amps 100A
Coil Resistance (Ohms) 29
Pull-In Voltage (V) 14.5 Maximum
Drop Out Voltage (V) 6.0 Maximum
Coil Power Dissipation (W) 19.86
Typical Pull-In Time 20ms
Typical Voltage Drop Per Pole
Across New Contacts At 100A
50mV
Operating Ambient Temperature -40 to +60℃
Protection IP66
Guideline Weight 920g
Application Uninterrupted
Thermal Current Rating 100A
Intermittent Current Rating:
30% Duty 185A
40% Duty 160A
50% Duty 140A
60% Duty 130A
70% Duty 120A

 

Free UK Mainland Postage and Packaging

Delivery Options Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
 Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.

International Consignments

 International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
 Export orders will only be accepted when placed online.


Featured Products
0-534-10 Durite 12V-24V Red LCD Battery Voltage Monitor
0-534-10 Durite 12V-24V Red LCD Battery Voltage Monitor

12V or 24V LED style battery monitor. Panel or bracket mounted gauge with 6.3mm terminals and fits into a 28mm socket.

Available
 Reference: 0-534-10 £20.34   £17.29

0-564-02 12V to 48V Reversing Alarm 97dB(A) at 1200Hz
0-564-02 12V to 48V Reversing Alarm 97dB(A) at 1200Hz

Multi-voltage 12-48V reverse/back up alarm, 97dB(A) at 1200Hz, 60 pulses per minute, two position fixing bracket, CE approved.

Available
 Reference: 0-564-02 £24.74   £21.03

SW60-37P Albright 12V DC IP66 Sealed Miniature Solenoid Intermittent 80A
SW60-37P Albright 12V DC IP66 Sealed Miniature Solenoid Intermittent 80A

Albright SW60-37P 12V intermittent contactor, designed for a compact DC application, used as a line switch on electric vehicles.

7 in stock
 Reference: SW60-37P £16.00
Recently Viewed
NATO NCAGE Supplier Code: U07T3  |  Need help? Email us: sales1@arc-components.com
Arc-Components.com
UK ISO9001 Auto Electrical Parts Specialists