SW80-494 Albright Single-acting Solenoid Contactor 72-80V Continuous

£38.95  Excl. VAT
  (£46.74 Inc. VAT)
 Excl. VAT

Earn 38 Loyalty Points
Pre-order
Despatch: 9 to 12 Weeks

Weight:  400 g


Model:  SW80-494
Bar Code:  DNA
Part Number:  SW80-494
Brand:  Albright
Colour  Black
Voltage  72-80V DC
Amperage  100A
Material  Copper/Silver/Bakelite
Coil type  Continuous

Pre-order and back-ordering is available with a current 9 to 12 weeks despatch. Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.


 Albright SW80-494 single-acting solenoid contactor, 72-80Vdc continuous with integral bracket.

  • The SW80 series of contactors has been designed for direct current loads, particularly motors as used on small electric vehicles such as light industrial trucks, powered invalid cars, etc., they have double-breaking contacts with Silver-alloy contact tips, which are weld resistant, hardwearing and have excellent conductivity.
  • They are economical in price and compare favourably with sealed automotive style solenoid switches which cannot be serviced or inspected for contact wear.
  • Repair contact kit part number: 2070-57.
  • Auxiliary switch kit part number: 2070-124.

Dimensions

  • Height including terminals and coil base cap: 94mm.
  • Coil width: 41mm.
  • Cap width: 50.5mm.
  • Cap depth: 39mm.

About Continuous (CO.) SW80 Solenoids

 Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 The SW80 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via the integral bracket formed into the coil housing case. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.

Interrupted Current: The opening and closing on load with frequent switching (resulting in increased contact resistance).
Uninterrupted Current: No or infrequent load switching requirements (maintains a lower contact resistance).

Specifications

Device Type SPST NO
Voltage 72-80V D.C.
Coil Type Continuous
Amps 100 Amps
Coil Resistance (Ohms) 600
Pull-In Voltage (V) 45.0 Max.
Drop Out Voltage (V) 18.0 Max.
Coil Power Dissipation (W) 8.64
Typical Pull-In Time 20ms
Typical Voltage Drop Per Pole
Across New Contacts At 100A
< 40mV
Operating Ambient Temperature -40 to +60℃
Weight 430g
Application Interrupted Uninterrupted
Thermal Current Rating 100A 125A
Intermittent Current Rating:
30% Duty 185A 230A
40% Duty 160A 200A
50% Duty 140A 175A
60% Duty 130A 160A
70% Duty 120A 150A

 

Free UK Mainland Postage and Packaging

Delivery Options Our Free UK Mainland Postage and Packaging Service offers unbeatable value for money. The free UK Standard shipping is automatically applied to your shopping cart page with no additional cost when you reach the £50.00 minimum order value.
We use Royal Mail Standard or Recorded Delivery for light, low-value orders and we use UPS, Parcel Force, and other major courier services for larger and more valuable consignments.

International Consignments

 Our international customers will need to provide the exact Card Holder Address (Invoicee) as the first address for payment processing. Please note that PO Box addresses are not acceptable as delivery addresses by some couriers. All export orders must be placed and paid for online. Proforma Bank Transfer IBAN and SWIFT payment methods are available to create online.


Related Products
SU280-1548P Albright Single-acting 72-80V 250A Contactor - Continuous IP66
SU280-1548P Albright Single-acting 72-80V 250A Contactor - Continuous IP66

SU280-1548P single-acting IP66 protected solenoid contactor 72V-80V continuous. 250A SPST 72 to 80-Volts DC solenoid.

2 in stock
 Reference: SU280-1548P £73.23
SU60-2499P Albright 72-80V DC Single-acting Miniature Solenoid Continuous 100A
SU60-2499P Albright 72-80V DC Single-acting Miniature Solenoid Continuous 100A

Albright SU60-2499P 72-80 Volts DC 100A contactor, continuous. 72-80Vdc 100 Amps solenoid designed for compact DC applications, IP66.

2 in stock
 Reference: SU60-2499P £22.58
SW200A-252 Albright Single-acting Solenoid Contactor - 72-80V Prolonged
SW200A-252 Albright Single-acting Solenoid Contactor - 72-80V Prolonged

Albright 72/80Vdc 250A single-acting contactor with auxiliary microswitch, prolonged. Height including terminals: 153mm.

Pre-order
Despatch: 9 to 12 WeeksReference: SW200A-252 £129.32
SW80-15 Albright Single-acting Solenoid Contactor 72V Continuous
SW80-15 Albright Single-acting Solenoid Contactor 72V Continuous

SW80-15 single-acting solenoid contactor, 72Vdc continuous. 100A single-pole, single-throw 72 Volts solenoid.

No stock
 Reference: SW80-15 £37.90
SW80-8 Albright Single-acting Solenoid Contactor 36V Continuous
SW80-8 Albright Single-acting Solenoid Contactor 36V Continuous

SW80-8 single-acting solenoid contactor, 36Vdc continuous. 100A single-pole, single-throw 36 Volts solenoid.

Pre-order
Despatch: 9 to 12 WeeksReference: SW80-8 £37.90
SW80-TBC Albright Single-acting Solenoid Contactor 72-80V Intermittent
SW80-TBC Albright Single-acting Solenoid Contactor 72-80V Intermittent

SW80-TBC single-acting solenoid contactor, 72-80Vdc intermittent. 100A single-pole 72 to 80 Volts solenoid with bracket.

Pre-order
Despatch: 9 to 12 WeeksReference: SW80-TBC £38.95
Featured Products
Durite 10A Red MICRO2™ Automotive Blade Fuse | Re: 0-376-70
Durite 10A Red MICRO2™ Automotive Blade Fuse | Re: 0-376-70

Durite automotive MICRO2 blade 10A Red fuses. Width: 9.1mm and length including blade: 15.3mm.

Available
 Reference: 0-376-70 From:  £5.13

Durite Add-A-Circuit Standard Blade Fuse Holder | Re: 0-376-99
Durite Add-A-Circuit Standard Blade Fuse Holder | Re: 0-376-99

Durite Add-a-circuit standard blade fuse holder. Adds one extra fuse when used to replace a fuse in the fusebox.

Available
 Reference: 5-376-99 From:  £5.18

MEGA Fuse Holder for the MEGA Range of Fuses | Re: 0-376-85
MEGA Fuse Holder for the MEGA Range of Fuses | Re: 0-376-85

Durite Black MEGA type fuse holder. Side stackable carrier for the Littelfuse Mega range of fuses with M8 studs.

Available
 Reference: 0-376-85 From:  £9.18
Recently Viewed
NATO NCAGE Supplier Code: U07T3  |  Need help? Email us: sales1@arc-components.com
Arc-Components.com
UK ISO9001 Auto Electrical Parts Specialists