| 
Need help? Email us: sales1@arc-components.com

SW182B-299 Albright Double-acting Motor-reversing Solenoid 48V Intermittent

£162.07 Excl. VAT
(£194.48 Inc. VAT)
Earn 162 Loyalty Points
   
Pre-order
Despatch: 8 to 10 Weeks
Model
SW182B-299
Bar Code
DNA
Part Number
SW182B-299
Brand
Albright
Colour
Black
Voltage
48V DC
Amperage
150A
Material
Copper/Silver/Bakelite
Coil type
Intermittent
 Intrastat HS Code  8536490000
Ship Weight
1.83 kg
 

 Pre-orders and back-ordering are available for all Albright brand out-of-stock items, with a current lead time of approximately 8 to 10 weeks despatch.

  • Ordering more Albright brand products than is shown in stock will put your order into a backorder process.
  • Request "Ship all available" in the order comments section if you order more units than are available.

 Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.


 Albright SW182B-299 double-acting 48Vdc strapped pair intermittent solenoid contactor with dust shields and L-Shaped brackets.

  • Double-acting strapped pair 48 Volts DC contactor for motor reversing.
  • The SW182 series of contactors has been designed for direct current loads, particularly motors used on small electric vehicles such as industrial trucks, airport tractors, etc.
  • The contactors are compact in size and are fully serviceable, with a range of spare parts available.
  • Repair contact kit part number: 2180-44.
  • Auxiliary switch kit part number: 2180-796 (1 kit does 1 x coil).
  • Dust shields fitted.
  • L-shaped brackets and 2 crank links fitted.

Dimensions

  • Height, including terminals and coil base cap: 121.5mm.
  • Coil width, including bars and bracket: 124.5mm.
  • Cap width: 2 x 40mm.
  • Total depth, including bracket: 66mm.

About The Intermittent SW182B-299 Reversing Contactors

 Intermittent contactors, by design, are predominantly used for hydraulic functions on vehicles; they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.

 The SW182B is a configuration of two 'Single Pole, Double Throw' type contactors on a common bracket for motor reversing. The SW182B features single pole double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity.

 The SW182B main contact circuit, designed for motor reversing, is such that it has a built-in failsafe so that if both coils are energised simultaneously, the contact arrangement is open circuits.

 The SW182B has M8 stud main terminals and 6.3mm spade coil connections. Mounted using the supplied bracket, mounting of the solenoids can be horizontal or vertical. When vertical, the M8 contact studs should point upwards.

Interrupted Current: The opening and closing on load with frequent switching (resulting in increased contact resistance).
Uninterrupted Current: No or infrequent load switching requirements (maintains a lower contact resistance).

Magnetic Blowouts

 These contactors are fitted with magnetic blowouts (denoted by the 'B' suffix in the SW182B range) across contact gaps. These enable high currents to be ruptured quickly so that arcing time is reduced to a minimum. Fitting of blowouts can make the contacts polarity sensitive, and the positive markings on the top cover of the contactor must be observed.

Specifications

Device Type Paired SPDT
Voltage 48V D.C.
Coil Type Intermittent
Amps 150A
Coil Resistance (Ohms) 73
Pull-In Voltage (V) 29.0 Max.
Drop Out Voltage (V) 12.0 Max.
Coil Power Dissipation (W) 31.56
Typical Pull-In Time 30ms
Typical Voltage Drop Per Pole
Across New Contacts At 100A
NO: 30mV
NC: 40mV
Operating Ambient Temperature -40 to +60℃ (guide)
Guideline Weight 1.68kg
Application Uninterrupted
Thermal Current Rating 150A
Intermittent Current Rating:
30% Duty 275A
40% Duty 240A
50% Duty 225A
60% Duty 200A
70% Duty 180A

 


Delivery
 
UK Mainland Postage

Delivery Options Our Free UK Mainland Postage and Packaging Service offers unbeatable value for money. The free UK Standard shipping is automatically applied to your shopping cart page with no additional cost when you reach the £50.00 minimum order value.

 We use Royal Mail Standard or Recorded Delivery for light, low-value orders and we use FedEx, UPS, Parcel Force, and other major courier services for larger and more valuable consignments.

 
International Consignments

 Our international customers will need to provide the exact Card Holder Address (Invoicee) as the first address for payment processing. Please note that PO Box addresses are not acceptable as delivery addresses by some couriers. All export orders must be placed and paid for online. Proforma Bank Transfer IBAN and SWIFT payment methods are available to create online.

Also Bought

Customer Feedback (0)
Leave a Review