SW88-125L Albright Double-acting Reversing Solenoid 12V Intermittent

 Albright SW88-125L 12Vdc 100 Amps double-acting strapped pair contactor with Diode, Resistor and large tips fitted, intermittent.

• Double-acting strapped pair 12 Volts DC contactor for motor-reversing.
• The SW88 series of contactors has been designed for direct current loads, particularly motors as used on small electric vehicles such as Light Industrial Trucks, Powered Invalid Cars, etc.
• The contactors are compact in size and are fully serviceable, with a range of spare parts available.
• Long Normally Closed contact on the right.
• Large contacts [Normally Open only].
• Diode and resistor fitted, positive at the top.
• End caps fitted.

Dimensions

• Height including terminals and coil base cap: 94mm.
• Coil width including bars: 119mm.
• Cap width: 2 x 39mm.
• Total depth including bracket: 55mm.

Associated products

• Auxiliary switch kit part number: 2070-124 (1 kit does 1 x coil).

About The Intermittent SW88-125L Reversing Contactors

 Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.

 The SW88 is a configuration of two SW84 type contactors on a common bracket for motor reversing. The SW88 features single pole double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity.

 The SW88 main contact circuit, designed for motor reversing, is such that it has a built-in failsafe, so that if both coils are energised simultaneously the contact arrangement is open circuits.

 The SW88 has M8 stud main terminals and 6.3mm spade coil connections. Mounted using the supplied bracket, mounting of the solenoids can be horizontal or vertical, when vertical the M8 contact studs should point upwards.

Specifications