SW92-12 Albright 2 x 12V SW80 Single-acting Contactors On A Double Bracket - Intermittent

 Albright SW92-12, 2 x SW80 12Vdc single-acting solenoid contactors on a double bracket, intermittent.

• The SW92 has been designed for direct current loads.
• Developed for both interrupted and uninterrupted loads,the SW92 is suitable for switching Resistive, Capacitive and Inductive loads.
• Repair contact kit for a single coil is part number: 2070-57, you require 2 x to service both contactors on the SW92.
• Auxiliary switch kit for a single coil is part number: 2070-124, you require 2 x for the SW92, 1 switch per SPST coil.
• 6 inch (minimum) flying coil leads fitted.
• One link accross positive terminal.
• ONE LINK ACROSS POSITIVE TERMINAL. COIL LEADS 6 INCHES LONG (MINIMUM).

Dimensions

• Height, including terminals and coil base cap: 94mm.
• Coil width: 41mm.
• Cap width: 50.5mm.
• Cap depth: 39mm.

About Intermittent (Int.) SW92 Solenoids

 Intermittent contactors, by design, are predominantly used for hydraulic functions on vehicles; they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.

 The SW92 features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity. The SW92 has M8 stud main terminals and 6.3mm spade coil connections. Mounting using the supplied bracket, can be horizontal or vertical, when vertical the M8 contact studs should point upwards.

Specifications