SW822-48P Albright Paired Double Pole Single Throw Solenoid 24V Intermittent - IP66

£87.30  Excl. VAT
  (£104.76 Inc. VAT)


Earn 87 Loyalty Points
Pre-order
Despatch: 6 to 8 Weeks

Weight:  960g


Model:  SW822-48P
Part Number:  SW822-48P
Brand:  Albright
Colour:  Black
Voltage:  24V DC
Amperage:  100A
Material:  Copper/Silver/Bakelite
Coil type:  Intermittent

Pre-order and back-ordering are available with a 6 to 8 week lead time. Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.


 Albright's SW822-48P strapped pair, 24 volt 100A, intermittent use, DPST normally open switch contactor.

  • The SW822P has been designed for Motor Reversing applications with direct current loads, particularly motors as used on electric vehicles such as industrial trucks.
  • Developed for both interrupted and uninterrupted loads, the SW822P is suitable for switching Resistive, Capacitive and Inductive loads.
  • Supplied with mounting bracket.
  • Due to the sealed nature of these units, no service or repair kits are available.

Dimensions

  • Base plate to top of brass studs (height): 94mm.
  • Body length excluding mounting bracket: 97mm.
  • Depth: 58mm including bracket.
  • Main terminal studs: M8.

About Intermittent (INT.) SW822-48P Solenoids

 Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.

 The SW822P features double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity. The SW822P features an enclosed top cover and offers environmental protection to IP66.

 The SW822P has M8 stud main terminals and 6.3mm spade coil connections. Mounted using supplied brackets, mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.

Interrupted current - opening and closing on load with frequent switching (results in increased contact resistance).
Uninterrupted current - no or infrequent load switching requirements (maintains a lower contact resistance).

Specifications

Device Type SW822 Paired DPST NO
Voltage 24V D.C.
Coil Type Intermittent
Amps 100A
Coil Resistance (Ohms) 29
Pull-In Voltage (V) 14.5 Maximum
Drop Out Voltage (V) 6.00 Maximum
Coil Power Dissipation (W) 19.86
Typical Pull-In Time 20ms
Typical Voltage Drop Per Pole
Across New Contacts At 100A
50mV
Operating Ambient Temperature -40 to +60℃
Protection IP66
Guideline Weight 920g
Application Uninterrupted
Thermal Current Rating 100A
Intermittent Current Rating:
30% Duty 185A
40% Duty 160A
50% Duty 140A
60% Duty 130A
70% Duty 120A

 

Free UK Mainland Postage and Packaging

Delivery Options Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
 Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.

International Consignments

 International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
 Export orders will only be accepted when placed online.


Featured Products
0-187-00 Pair of 25A Red-Black Crocodile Clips Jaw 32mm
0-187-00 Pair of 25A Red-Black Crocodile Clips Jaw 32mm

1 Pair of 25A plated steel crocodile clips, with one black and one red insulated soft PVC covers.

Available
 Reference: 0-187-00 £4.88   £4.15

0-445-08 Durite 12V-24V Three Bolt Multifunction Amber LED Beacon
0-445-08 Durite 12V-24V Three Bolt Multifunction Amber LED Beacon

Multifunction 12 or 24 volt dc three bolt fixing beacon with amber polycarbonate lens. 40 x 9W LED's.

Available
 Reference: 0-445-08 £35.08   £29.82

Durite 12V 30A Mini Make and Break Relay | Re: 0-727-12
Durite 12V 30A Mini Make and Break Relay | Re: 0-727-12

12V 4 terminal mini make and break automotive relay, 12V 30 amp, replaces Lucas: SRB520, Guardian: GR1.

Available
 Reference: 0-727-12 From:  £4.37
Recently Viewed
NATO NCAGE Supplier Code: U07T3  |  Need help? Email us: sales1@arc-components.com
Arc-Components.com
UK ISO9001 Auto Electrical Parts Specialists