SW80-766P Albright 24V Solenoid Contactor Sealed to IP66 - Continuous

 Albright SW80-766P single-acting solenoid contactor 24VDC, continuous with M4 stud terminal assembly fitted.

• Sealed to IP66 for weatherproofing and are suitable for marine internal applications.
• The SW80 series of contactors has been designed for direct current loads, particularly motors used on small electric vehicles such as light industrial trucks, powered invalid cars, etc.; they have double-breaking contacts with Silver-alloy contact tips, which are weld resistant, hardwearing and have excellent conductivity.
• They are economical in price and compare favourably with sealed automotive-style solenoid switches.
• Repair contact kits are not available for this unit due to the weatherproofing.
• M4 Stud terminal assembly fitted for coil connections.

About Continuous (CO.) SW80P Solenoids

 Continuous contactors, by design, are predominantly used for drive functions on vehicles; they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 The Albright SW80-766P 24 Volts DC single-acting SPST 100 Amps solenoid contactor is designed for direct current loads. Its Silver-alloy contact tips are weld resistant and hardwearing. This cost-effective contactor is excellent for small electric vehicle motors, light industrial trucks, and powered invalid cars.

 With its double-breaking contacts and reliable conductivity, the Albright SW80-766P contactor is perfect for your DC load needs. It is also sealed to IP66 for weatherproofing, making it suitable for internal marine applications. Plus, its economical price makes it a great value option compared to sealed automotive-style solenoid switches.

 The SW80P contactors, by design, has M8 stud main terminals on the top cover and coil energising M4 stud terminals that exit up through the top cap and are internally wire connected from the coil. Mounted using supplied brackets, the mounting can be horizontal or vertical. When vertical, the M8 contact studs should point upwards.

Specifications