SW560A-24 Albright 24V Busbar Contactor with Auxiliary - Continuous

 Albright International SW560A-24 24 Volts single-pole, single-throw solenoid contactor with auxiliary microswitch.

• The SW560A is designed for use in telecommunications and power distribution applications where an uninterrupted current load is switched.
• These contactors are primarily for use with Direct Current loads but can also be used with Alternating Currents.
• The SW560A features double-breaking main contacts with Silver-alloy tips which are weld resistant, hardwearing and have excellent conductivity.
• Silver plating on the main contacts is standard for the SW560A.
• Auxiliary microswitch fitted.

Dimensions

• Height including terminals and coil base cap: 98mm.
• Coil width: 45mm.
• Cap width: 57mm.
• Cap and fixed contact total width: 128mm.
• Fixed contact depth: 64mm.

Associated Parts

• 2155-165 Vertical mounting bracket single (2 x recommended)
• 2065-167A Horizontal mounting bracket kit (1 x recommended)

About Continuous (CO.) SW560A Solenoids

 Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 The SW560A is a compact contactor that can be busbar mounted vertically or horizontally, if mounted vertically the coil should be at the bottom.

 This version of the SW560A unit has an auxiliary microswitch mounted on the top cover, the auxiliary contact connection is triggered by the coil energising.

Specifications