SW201N-2 Albright 24V Single Pole Double Throw Solenoid Contactor - Intermittent

£104.67  Excl. VAT
  (£125.60 Inc. VAT)


Earn 104 Loyalty Points
Pre-order
Despatch: 6 to 8 weeks.

Weight:  1.43kg


Model:  SW201N-2
Part Number:  SW201N-2
Brand:  Albright
Colour:  Black
Voltage:  24V DC
Amperage:  250A
Material:  Copper/Silver/Bakelite
Coil type:  Intermittent

Pre-order and back ordering is available with a 6 to 8 week lead time. Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.


 SW201N-2 single pole, double throw solenoid contactor without magnetic blowouts, 24 volt dc intermittent.

  • The SW201N has been designed for 24V direct current (DC) loads, including motors as used on electric vehicles such as industrial trucks.
  • Developed for both interrupted and uninterrupted loads, the SW201N is suitable for switching Resistive, Capacitive and Inductive loads.

Associated Products

  • 2155-250 Albright SW201 Series Contact Kit.
  • 2155-202 Auxiliary Micro-Switch Kit for Largest Albright Contactor Caps.
  • 2065-167A Albright Solenoid Mounting Bracket.
  • 2155-165 Albright Large Solenoid L-Shape Mounting Bracket.
  • 2028-551A Albright Solenoid Mounting Bracket

Magnetic Blowouts

 These contactors are fitted without magnetic blowouts as standard.

About Intermittent (INT) SW201N-2 Solenoids

 Intermittent contactors by design are predominantly used for hydraulic functions on vehicles, they make and break quicker than continuous solenoids and are not recommended for prolonged contact periods.

 The SW201N has M10 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or mounting brackets purchased as separate items. Mounting can be horizontal or vertical, when vertical the M10 contact studs should point upwards. Please note Normally Closed contacts are not suited to make and break load.

Interrupted current - opening and closing on load with frequent switching (results in increased contact resistance).
Uninterrupted current - no or infrequent load switching requirements (maintains a lower contact resistance).

Specifications

Device TypeSW201N-2 SPDT Contactor
Voltage24V D.C.
Coil TypeIntermittent
Amps250 amp
Typical Voltage Drop Across
Contacts per 100 Amperes
40mV
Coil Resistance (Ohms)18
Pull-In Voltage (V)15.0 Maximum
Drop Out Voltage (V)6.0 Maximum
Coil Power Dissipation (W)32.00
ApplicationInterrupted - Uninterrupted
Thermal Current Rating250A
Intermittent Current Rating:
30% Duty450A
40% Duty390A
50% Duty360A
60% Duty320A
70% Duty300A

 

Free UK Mainland Postage and Packaging

Delivery Options Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
 Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.

International Consignments

 International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
 Export orders will only be accepted when placed online.


Featured Products
0-642-16 12V 420Hz High Tone 2 Pole Electric Horn
0-642-16 12V 420Hz High Tone 2 Pole Electric Horn

12V 420Hz high tone disc horn, 2 pole, 112dB(A), diaphragm type with passivated and painted steel body.

Reference: 0-642-16 £13.04   £10.82

0-856-20 Durite Inverter Modified Wave 12V DC to 230V AC - 1000 watt
0-856-20 Durite Inverter Modified Wave 12V DC to 230V AC - 1000 watt

Durite's double socket inverter, modified wave 12 volts DC to 230 volts AC. 1000W, 230 Volts AC duel socket modified wave inverter.

Reference: 0-856-20 £288.76   £239.67

Durite 10A Red Standard Automotive Blade Fuse | Re: 0-375-10
Durite 10A Red Standard Automotive Blade Fuse | Re: 0-375-10

Durite automotive standard size blade fuse, red, width: 19.0mm, length including blade: 19.0mm thickness: 5.0mm.

Reference: 0-375-10 From:  £1.58
Recently Viewed
NATO NCAGE Supplier Code: U07T3  |  Need help? Email us: sales1@arc-components.com
Arc-Components.com
UK ISO9001 Auto Electrical Parts Specialists