SW190A-345 Albright Double-pole Single Coil Solenoid - 24V Continuous

 Albright SW190A-345 24 Volts DC double pole switch solenoid with an auxiliary microswitch and top hat bracket.

• The SW190 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks.
• Developed for both interrupted and uninterrupted loads, the SW190 is suitable for switching Resistive, Capacitive and Inductive loads.
• Top hat mounting bracket 2159-47 is fitted to this unit (Right-hand side) as standard.

Associated Products

• 2180-362 Service or repair contact kit

Dimensions

• Base plate to top of brass studs (height): 122mm.
• Depth: 51mm.
• Main terminal studs: M8.

About Continuous (CO.) SW190 Solenoids

 Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 The SW190 features double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The SW190 has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M5 tapped holes or mounting brackets; either supplied fitted, or as separate items. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.

Specifications