| 
Need help? Email us: sales1@arc-components.com

PC60B-2 Albright 12V DC PCB Mount SPST Solenoid - Continuous 80A

PC60B-2 Albright 12V DC PCB Mount SPST Solenoid - Continuous 80A
PC60B-2 Albright 12V DC PCB Mount SPST Solenoid - Continuous 80A
PC60B-2 Albright 12V DC PCB Mount SPST Solenoid - Continuous 80A
PC60B-2 Albright 12V DC PCB Mount SPST Solenoid - Continuous 80A
£18.33 Excl. VAT
(£22.00 Inc. VAT)
Earn 18 Loyalty Points
   
No stock
Model
PC60B-2
Bar Code
DNA
Part Number
PC60B-2
Brand
Albright
Colour
Black
Voltage
12V DC
Amperage
80A
Material
Copper/Silver/Bakelite
Coil type
Continuous
Weight
210 g
 

 Pre-orders and back-ordering are available for all Albright brand out-of-stock items, with a current lead time of 9 to 12 weeks despatch.

  • Ordering more Albright brand products than is shown in stock will put your order into a backorder process.
  • Request "Ship all available" in the order comments section if you order more units than are available.

 Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.


 Albright PC60B-2 12 Volts DC single-pole, single-throw (SPST) miniature single-acting solenoid contactor with magnetic blowouts, continuous. The unit has an M4 mounting bolt and is designed for printed circuit board mounting.

  • The PC60B is a miniature series single-pole, single-throw contactor designed for printed circuit board mounting.
  • Devised for interrupted and uninterrupted loads, the PC60 is suitable for switching Resistive, Capacitive and Inductive loads.
  • Typical applications include Telecommunication, UPS and other power conversion systems.
  • All the contactors are manufactured to a very high standard and employ the best quality materials: phenolic contact housings, Silver-alloy contacts and class H (180℃) winding wire for the coils.
  • Repair kit: not available on this unit.
  • The centre mounting screw is M4 x 8mm long.

Dimensions

  • Length: 84mm.
  • Width: 36mm.
  • Height (including terminals and mounting stud): 36mm.

About Continuous (CO.) PC60B Contactors

 Continuous contactors, by design, are predominantly used for drive functions on vehicles; they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 The PC60B features single pole double-breaking main contacts with Silver-alloy tips, which are weld resistant, hardwearing and have excellent conductivity. The PC60B can be secured to the printed circuit board by means of an M4 bolt.

Magnetic Blowouts

 These contactors are double break configurations and fitted with magnetic blowouts (denoted by the 'B' suffix in the PC60B range) across both contact gaps. These enable high currents to be ruptured very quickly so that arcing time is reduced to a minimum. The fitting of blowouts makes the contacts polarity sensitive, and the Positive markings on the top cover of the contactor must be observed.

Installation

  • To accommodate the PC Contactors, printed circuit boards should be drilled in accordance with the mounting details in the attached image (mounting details).
  • Prior to soldering, the PC60B can be secured to the circuit board by means of an M4 bolt that protrudes from the underside of the contactor.
  • If the full current ratings of the contactors are to be utilised, circuit board tracks should have the appropriate thickness and width of copper.
  • Conventional hand or wave soldering techniques can be used.
Interrupted Current: The opening and closing on load with frequent switching (resulting in increased contact resistance).
Uninterrupted Current: No or infrequent load switching requirements (maintains a lower contact resistance).

Specifications

Device Type NO - SP - ST
Voltage 12V D.C.
Coil Type Continuous
Amps 80A
Coil Resistance (Ohms) 21
Pull-In Voltage (V) 8.0 Max.
Drop Out Voltage (V) 3.0 Max.
Coil Power Dissipation (W) 6.86
Typical Pull-In Time 15ms
Typical Voltage Drop Per Pole
across New Contacts at 80A
< 40mV
Operating Ambient Temperature -40 to +60℃ (guide)
Guideline Weight 210g
Application Uninterrupted
Thermal Current Rating 80A
Intermittent Current Rating:
30% Duty 145A
40% Duty 125A
50% Duty 115A
60% Duty 105A
70% Duty 95A

 


Delivery
 
UK Mainland Postage Offer

Delivery Options Our Free UK Mainland Postage and Packaging Service offers unbeatable value for money. The free UK Standard shipping is automatically applied to your shopping cart page with no additional cost when you reach the £50.00 minimum order value.

 We use Royal Mail Standard or Recorded Delivery for light, low-value orders and we use FedEx, UPS, Parcel Force, and other major courier services for larger and more valuable consignments.

 
International Consignments

 Our international customers will need to provide the exact Card Holder Address (Invoicee) as the first address for payment processing. Please note that PO Box addresses are not acceptable as delivery addresses by some couriers. All export orders must be placed and paid for online. Proforma Bank Transfer IBAN and SWIFT payment methods are available to create online.

Also Bought

SW60-4 Albright 24V DC Single-acting Miniature Solenoid Continuous 80A

Albright SW60-4 24 Volts DC 80A SPST contactor, continuous. 24Vdc 80 Amps switch solenoid for compact DC applications.

Re: SW60-4 
£19.89
Excl VAT
5 in stock
SW60B-4 Albright 24V DC Single-acting Miniature Solenoid Continuous 80A

Albright SW60B-4 24 Volts DC 80A SPST open-top contactor with magnetic blowouts, continuous. 24Vdc 80 Amps solenoid for compact DC applications.

Re: SW60B-4 
£20.94
Excl VAT
No stock

Customer Feedback (0)
Leave a Review