ED125L-4 Albright Emergency Battery Disconnect Switch with Key 125A

£46.44  Excl. VAT
  (£55.73 Inc. VAT)


Earn 46 Loyalty Points

Weight:  400g

Availability:  

2 in stock, immediate despatch

Model:  ED125L-4
Part Number:  ED125L-4
Brand:  Albright
Colour:  Red/Black
Voltage:  12V to 48V DC
Amperage:  125A
Material:  Copper/Silver/Bakelite

Back ordering is available with a 6 to 8 week lead time. Please enquire by Telephone: +44 (0) 1924 823119 or Email to discuss further requirements.


Albright heavy duty and compact, emergency battery disconnect switch with removable key.

  • Rated 125A at 48V dc maximum current.
  • Single pole, single throw.
  • Two M5 fixing screws at 48mm centres.
  • Two M8 hex bolts for battery cable fixing.
  • Supplied with 2 keys.

Dimensions

  • 25mm diameter shaft clearance or panel hole.
  • Total height including button: 102mm.

Body Beneath Panel Dimensions

  • Width: 55mm.
  • Depth: 43mm.
  • Depth including cable bolts approximately: 62mm.

About the ED125L Emergency Stop Switch

 Typically used on 12 volt, 24 volt and 48 volt dc electric vehicle systems, the lockable ED125 is a manually operated device with an over-centre spring mechanism, which provides a snap action for both opening and closing of the main contacts. The ED125 is easy to install (see drilling details) and is secured with supplied M5 Posidrive mounting screws.

 This lockable version features a key which is necessary for the knob to be moved from the “Off” position to the “On” position. Once in the “On” position, the key can be removed. Thereafter, the knob may be depressed to the “Off” position, where it will automatically lock and remain locked until the key is used again to unlock it.

Uninterrupted current - no or infrequent load switching requirements (maintains a lower contact resistance).

Specifications

Application Uninterrupted
Device Type SPST Emergency Stop Switch with Key
Thermal Current Rating (Ith) 125 amp
Intermittent Current Rating 30% Duty 230A
40% Duty 200A
50% Duty 175A
60% Duty 160A
70% Duty 150A
Overload Currents that can be Ruptured 800A at 48V D.C.
Maximum Recommended Contact Voltage 48V D.C.
Typical Voltage Drop per pole
across New Contacts at 100A
40mV
Operating Ambient Temperature -40 to +60℃
Weight 377g

 

Free UK Mainland Postage and Packaging

Delivery Options Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
 Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.

International Consignments

 International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
 Export orders will only be accepted when placed online.


Featured Products
0-140-05 Pack of 50 5A Nickel Plated Steel Crocodile Clips 13mm Jaw
0-140-05 Pack of 50 5A Nickel Plated Steel Crocodile Clips 13mm Jaw

Pack of 50, 5A crocodile or alligator clips, nickel plated steel, 44mm long, jaw opening 13mm, Ministry: 5940.99.940.0856.

Reference: 0-140-05 £16.54   £13.73

0-649-27 Durite Mini Vehicle Battery Booster Pack - 12V
0-649-27 Durite Mini Vehicle Battery Booster Pack - 12V

Portable 12V jump starter with 12,000mAH Li-ion battery. Highly portable, small and compact with a self-contained battery booster.

Reference: 0-649-27 £130.00   £107.90

SW60-38P Albright 12V DC IP66 Sealed Miniature Solenoid Continuous 80A
SW60-38P Albright 12V DC IP66 Sealed Miniature Solenoid Continuous 80A

Albright SW60-38P 12V continuous contactor, designed for a compact DC application, used as a line switch on electric vehicles.

Reference: SW60-38P £15.24
Recently Viewed