DC88-TBC3 Albright 12V DC Motor Reversing Solenoid Contactor Continuous

£68.08  Excl. VAT
  (£81.70 Inc. VAT)


Earn 68 Loyalty Points
Pre-order
Despatch: 6 to 8 weeks.

Weight:  1.04kg


Model:  DC88-TBC3
Part Number:  DC88-TBC3
Brand:  Albright
Colour:  Black
Voltage:  12V DC
Amperage:  100A
Material:  Copper/Silver/Bakelite
Coil type:  Continuous

Pre-order and back-ordering are available with a 6 to 8 week lead time. Telephone: +44 (0) 1924 823119 or Email us to discuss further requirements.


 Albright 12 volt dc motor reversing solenoid contactor, continuous.

  • The DC88-TBC3 series of contactors has been designed for direct current loads, particularly motors as used on small electric vehicles such as light industrial trucks, powered invalid cars, etc.
  • They have double breaking main contacts with silver alloy contact tips, which are weld resistant, hardwearing and have excellent conductivity.
  • They are economical in price and compare favourably with sealed automotive style solenoid switches which cannot be serviced or inspected for contact wear.
  • The DC88 is a monoblock construction, resulting in a neat compact design which is compatible with modern electronic control systems.

Associated Products

  • 2070-41 Albright SW88 DC88 Solenoid Mounting Bracket
  • 2072-447 Pair of Albright DC88 Solenoid Mounting Brackets

About the DC88-TBC3 Motor Reversing Solenoid

 Continuous contactors by design are predominantly used for drive functions on vehicles, they make and break slower than intermittent solenoids and are recommended for prolonged contact periods.

 The main contact circuit, designed for motor reversing, has a built-in failsafe, so that if both coils are energised simultaneously the contact arrangement is open circuit. Coil connections are by means of 6.3mm spades and mounting is via M4 screws on a panel fixture or using an additional bracket (e.g. part number: 2070-41) and can be horizontal or vertical, when vertical the M8 contact studs should point upwards.

Interrupted current - opening and closing on load with frequent switching (results in increased contact resistance).
Uninterrupted current - no or infrequent load switching requirements (maintains a lower contact resistance).

Replacement Component Part Numbers

  • 2070-360A: Top cover and stud contacts.
  • 2070-14J: Moving contact.
  • 2070-326: Long bar fixed contact.

Specifications

Device Type DC88 Monoblock SPDT NO
Voltage 12V D.C.
Coil Type Continuous
Amps 100A
Coil Resistance (Ohms) 14
Pull-In Voltage (V) 8.0 Maximum
Drop Out Voltage (V) 3.5 Maximum
Coil Power Dissipation (W) 10.29
Typical Pull-In Time 20ms
Typical Voltage Drop Per Pole
Across New Contacts At 100A
Normally Open: Less than 40mV
Normally Closed: Less than 50mV
Operating Ambient Temperature -40 to +60℃
Guideline Weight 1.04kg
Application Interrupted - Uninterrupted
Thermal Current Rating 100A
Intermittent Current Rating:
30% Duty 185A
40% Duty 160A
50% Duty 140A
60% Duty 130A
70% Duty 120A

 

Free UK Mainland Postage and Packaging

Delivery Options Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
 Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.

International Consignments

 International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
 Export orders will only be accepted when placed online.


Featured Products
0-642-16 12V 420Hz High Tone 2 Pole Electric Horn
0-642-16 12V 420Hz High Tone 2 Pole Electric Horn

12V 420Hz high tone disc horn, 2 pole, 112dB(A), diaphragm type with passivated and painted steel body.

Reference: 0-642-16 £13.04   £10.82

0-856-20 Durite Inverter Modified Wave 12V DC to 230V AC - 1000 watt
0-856-20 Durite Inverter Modified Wave 12V DC to 230V AC - 1000 watt

Durite's double socket inverter, modified wave 12 volts DC to 230 volts AC. 1000W, 230 Volts AC duel socket modified wave inverter.

Reference: 0-856-20 £288.76   £239.67

Durite 10A Red Standard Automotive Blade Fuse | Re: 0-375-10
Durite 10A Red Standard Automotive Blade Fuse | Re: 0-375-10

Durite automotive standard size blade fuse, red, width: 19.0mm, length including blade: 19.0mm thickness: 5.0mm.

Reference: 0-375-10 From:  £1.58
Recently Viewed
NATO NCAGE Supplier Code: U07T3  |  Need help? Email us: sales1@arc-components.com
Arc-Components.com
UK ISO9001 Auto Electrical Parts Specialists