0-870-36 Blind Spot Detection System With Left Turn Speaker and Low Speed Trigger Module

 Durite intelligent ultrasonic blind spot detection system features an in-cab LED visual warning alert and left-turn speaker. Superfast speed detection and protected from steam-jet cleaning and features a low speed and indicator trigger module.

• Visual and audible warnings up to 1.5M with LED warning buzzer.
• Detection within 0.2 seconds.
• ECU is protected to IP69K.
• Sensor and connector protected to IP68.
• Shock and vibration resistant.
• Environment learning mode.
• Flush (0 degrees), 11degree and underslung mounting available.
• E Marked ECE R10.05

About the Blind Spot Detection System 0-870-30

 The Ultrasonic Detection System is strictly meant as a driver aid, and the driver is still responsible for SAFE and CORRECT driving.

 The Ultrasonic Detection System is a modern supervisory system that uses ultrasonic technology to eliminate blind spots for commercial vehicle drivers. The functional principle is based on the ultrasonic echo-transit time method. Each of the sensors will emit a steady intermitting ultrasonic signal. The sensors operate as both transmitters and receivers, which will receive the beamed and reflected ultrasonic signals from possible obstacles.

 The Ultrasonic Detection System can be fitted to the FRONT, CORNER, SIDE and BACK of the vehicle. The FRONT, CORNER and SIDE system can be activated by low speed or turning indicator through an extra control module. The BACK system can be activated by engaging the reverse gear. When the system is activated, the sensors will constantly scan the vehicle's surroundings. If any obstacle is detected, the in-cabin buzzer or display will send progressive visual and audible warnings to the driver. The driver shall then pay extra attention to the hazard area and manoeuvre the vehicle accordingly. The system can also be added with optional external warning alarms or warning lights so other road users in close proximity will be effectively informed of possible danger too.

 Compared to the traditional way of eliminating blind spots, i.e. checking mirrors for hazard areas, the Ultrasonic Detection System will constantly scan the vehicle's surroundings and send the driver both visual and audible warnings. Therefore, the driver will have more time to look ahead and check the mirrors. In heavy traffic, the surroundings can dramatically change in the blink of an eye, and the system will greatly aid the driver. Additionally, external warning alarms and warning lights will inform other road users, such as cyclists and pedestrians, to proactively keep their distance from the vehicle and avoid a collision.

 The systems come with an IP69K ECU box and IP68 sensors and connectors, so they are suitable for all types of commercial vehicles, such as HGVs, LGVs, vans and buses. The 12/24Vdc dual voltage feature means they can be connected to vehicles with either 12V or 24V power supply.