0-852-04 12V-24V 40A Solid State Battery Guard and Disconnect

£90.89  Excl. VAT
  (£109.07 Inc. VAT)
RRP:  £109.50
Savings before Cart:  £18.61
Earn 90 Loyalty Points
Available

Weight:  200g


Model:  0-852-04
Bar Code:  5056119130348
Part Number:  0-852-04
Brand:  Durite
Colour:  Black/Red
Voltage:  12V/24V DC
Amperage:  40A


 12V or 24V dc, 40A solid state battery guard.

  • 40 amp version with provision for external on-off switch.
  • Monitors the battery voltage and disconnect load when the battery voltage reaches a pre-determined level.
  • The voltage level at which the device operates to disconnect or reconnect the load to the battery can be set to one of 10 different programmes by the installer using a simple bridge and integral LED indicator.
  • The unit also has an alarm circuit to power an audio and/or visual indicator to warn of imminent disconnect, allowing the operator 50 seconds to rectify the situation before disconnecting.
  • A 10 second delay is built in prior to an alarm, to prevent spurious warnings.
  • The alarm circuit is limited to 500mA maximum, if a higher current is required a relay with a diode must be used, 0-727-14 for 12v and 0-727-26 for 24v.
  • Quiescent current is below 10mA.
  • Appropriate terminals and insulating covers are provided.
  • Protected to IP65.
  • ECE and CE approved.

Dimensions

  • Length: 76mm
  • Width: 78mm
  • Height: 33mm

Specifications

Type 40 amp inline solid state battery guard
Voltage 12/24 volt dc (auto sensing)
Auto disconnect 16 volt (12 volt system) and 32 volt (24 volt system)
Display LED indicator
Terminals 2 x M6 brass studs and 3 x 6.3mm blade
Compliance CE and ECE approved
Fixing 3 x self tapping screws (4mm x 13 mm)
Dimensions l 76 x w 78 x h 33mm
Protection IP65
Weight 160g
Free UK Mainland Postage and Packaging

Delivery Options Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
 Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.

International Consignments

 International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
 Export orders will only be accepted when placed online.


Featured Products
0-005-12 Pack of 50 Durite 6.30mm Piggyback Terminals
0-005-12 Pack of 50 Durite 6.30mm Piggyback Terminals

Pack of 50, piggy-back terminals, to suit cable 2.00mm² to 2.50mm², 6.30mm push on terminals.

Reference: 0-005-12 £11.82   £9.81

0-005-29 Pack of 50 6.30mm Female Terminal for Cable 2.50mm˛ to 4.00mm˛
0-005-29 Pack of 50 6.30mm Female Terminal for Cable 2.50mm˛ to 4.00mm˛

6.30mm Push-on female terminal with high current shoe, for cable size 2.50mm² to 4.00mm².

Reference: 0-005-29 £13.00   £10.79

DC66-13P Albright 24V DC Motor Reversing Solenoid Continuous 80A IP66
DC66-13P Albright 24V DC Motor Reversing Solenoid Continuous 80A IP66

DC66P-13P, ideally suitable for use with small battery powered winches, vehicle mounted cranes, small electric vehicles, etc.

Reference: DC66-13P £39.92
Recently Viewed
NATO NCAGE Supplier Code: U07T3  |  Need help? Email us: sales1@arc-components.com
Arc-Components.com
UK ISO9001 Auto Electrical Parts Specialists