0-645-00 Off-A-A+B Three Position Side-Head Lamp Toggle Switch 10A
Bar Code: 5056119120509
Part Number: 0-645-00
Voltage: 28V DC
Off-A-A+B, three position side and headlamp single pole switch.
- With nickel plated brass lever.
- Three 6.3mm blade terminals.
- Requires 13mm panel hole.
- Rated: 10A at 28V DC.
- Sold single.
- 0-603-03 sprung loaded red toggle switch safety guard.
- 0-603-99 pack of 10 rubber sealing gaiters for 12.5mm shafted switches.
About the 10A Headlamp Function Metal Toggle Switch
A single pole metal switch with a plated brass lever, suitable for power load switching up to 10 amps at 28V DC (suitable for 12V DC and 24V DC circuits). Switching function is 'off', 'A' and 'A plus B', the positions fix in place until operated again.
|Type ||Single pole 3 position 'Off, A and A+B' toggle switch |
|DC voltage rating at 28 volts ||10 amps |
|AC voltage rating ||10 amps at 250VAC, 15 amps at 125VAC |
|AC inductive contact rating ||4 amps at 250VAC |
|Electrical life ||50,000 cycles minimum at maximum rating |
|Mechanical life ||100,000 cycles minimum |
|Contact material ||Fixed: silver on copper. |
Moving: silver alloy on copper.
|Terminals ||Brass 6.3mm lucar blade |
|Base material ||Nylon |
|Actuators and finish ||Bright nickel plated brass lever |
|Temperature range ||Operating: 0 to +85℃. |
Storage: -40 to +85℃.
|Contact resistance ||10mΩ maximum at 4 volts dc and 1 amp |
|Electric strength ||0.75kV across contacts and 2kV live to accessible surfaces. |
|Insulation resistance ||Greater than 50MΩ |
|Mounting ||Threaded bush, 15/32 Whitworth, secured front and behind the panel by fixing nut and ring. |
|Dimensions ||Length: 33.4mm, Width: 19.2mm and Height: 63mm (including level and tabs) |
|Weight ||40g |
Free UK Mainland Postage and Packaging
Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.
International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
Export orders will only be accepted when placed online.