0-605-41 Marine Emergency Cut-Off Switch with Lanyard 15A

£10.62  Excl. VAT
  (£12.74 Inc. VAT)
RRP:  £12.80
Savings before Cart:  £2.18
Earn 10 Loyalty Points
Available

Weight:  50g


Model:  0-605-41
Bar Code:  5056119119350
Part Number:  0-605-41
Brand:  Durite
Colour:  Black/Red
Voltage:  12V DC
Amperage:  15A


 Marine emergency cut-off switch with lanyard.

  • Marine emergency cut-off switch with lanyard, cut-out can also be operated with lanyard clip in place by pressing knob.
  • Suitable for engine kill.
  • Suitable for coil or magneto ignition.
  • 6.3mm blade terminals, 16mm panel hole.
  • Rated:15 amps at 12 volts dc.

About the Kill Cord Emergency Stop Switch

 The 0-605-41 emergency stop switches are designed for use on marine boats and watercraft engines as a pull cord kill switch, the unit is also suitable for ride on equipment such as lawnmowers and brush cutters.

 A safety cord switch on watercraft can save lives and helps avoid serious accidents, it would be right to offer that; the fitting of these types of switches, from whichever reputable source, is good safety practice. A report published in the UK in 2013 by the Marine Accident Investigation Branch quoted: “the lack of a kill cord switch contributed to the cause of death” regarding a major boating accident.

Dimensions

  • Length: 50.2mm
  • Diameter: 27.2mm
  • Hole required: Ø16mm

Specifications

Type Marine emergency cut-off switch
Current rating at 12vdc 15 amp continuous
Terminals 6.3mm blade
Panel hole 16mm diameter
Panel thickness 2.5mm maximum
Lanyard 45cm unstretched
Weight 65g
Free UK Mainland Postage and Packaging

Delivery Options Free UK Mainland delivery discount is selectable on your shopping cart page; a £50.00 minimum order value is applicable for the Free Delivery Service, with a variable low Standard Rate shipping charge for smaller consignments.
 Despatch methods for Standard and Free UK Delivery Service include light, low-value orders despatched via Royal Mail standard or recorded delivery, with large and high-value orders despatched via UPS and Parcel Force courier services.

International Consignments

 International orders and consignments require the exact Card Holder Address (Invoicee) as the first address for payment processing. PO Box addresses are not acceptable as delivery addresses by some couriers.
 Export orders will only be accepted when placed online.

0-525-06 Durite Marine 12V-24V LED Illuminated Fuel Level Gauge
0-525-06 Durite Marine 12V-24V LED Illuminated Fuel Level Gauge

12V-24V marine styled fuel level gauge, 90° sweep dial, supplied without pole tank sender, matt black bezel and white figures.

Reference: 0-525-06 £53.42   £44.34
0-525-22 Durite 12V Marine LED Illuminated Battery Condition Meter or BDI
0-525-22 Durite 12V Marine LED Illuminated Battery Condition Meter or BDI

12V marine styled battery condition voltmeter or battery discharge indicator (BDI), 52mm diameter, 90° sweep dial, plastic cased.

Reference: 0-525-22 £50.62   £42.01
0-601-26 Single DIN Plug 16A Maximum
0-601-26 Single DIN Plug 16A Maximum

Durite single DIN style automotive plug, rated at 16 amps maximum use.

Reference: 0-601-26 £4.86   £4.03


Featured Products
0-534-10 Durite 12V-24V Red LCD Battery Voltage Monitor
0-534-10 Durite 12V-24V Red LCD Battery Voltage Monitor

12V or 24V LED style battery monitor. Panel or bracket mounted gauge with 6.3mm terminals and fits into a 28mm socket.

Reference: 0-534-10 £19.66   £16.32

0-564-02 12V to 48V Reversing Alarm 97dB(A) at 1200Hz
0-564-02 12V to 48V Reversing Alarm 97dB(A) at 1200Hz

Multi-voltage 12-48V reverse/back up alarm, 97dB(A) at 1200Hz, 60 pulses per minute, two position fixing bracket, CE approved.

Reference: 0-564-02 £23.90   £19.84

SW60-37P Albright 12V DC IP66 Sealed Miniature Solenoid Intermittent 80A
SW60-37P Albright 12V DC IP66 Sealed Miniature Solenoid Intermittent 80A

Albright SW60-37P 12V intermittent contactor, designed for a compact DC application, used as a line switch on electric vehicles.

Reference: SW60-37P £15.24
Recently Viewed