0-523-68 Durite Non Illuminated 10V to 36V LCD Engine Hour Counter

£62.13 Excl. VAT

RRP ~~£70.60~~ Excl. VAT

Initial Savings

£8.47

(£74.56 Inc. VAT)

Earn 62 Loyalty Points

Available

Model

0-523-68

Bar Code

5056119115765

Part Number

0-523-68

Brand

Durite

Colour

Black

Voltage

12V/24V DC

Material

Brass/Copper/Steel/Plastic

Weight

95 g

Durite 10V to 36V digital LCD engine hour counter.

Vehicle engine hour counter with Matt Black bezel and white figures.
The unit requires a 52mm dashboard hole.
Bridge-type fitting.
40mm deep.
Non illuminated.
Pack Quantity: 1 piece.

Fitting Instructions for Translation

Choose a suitable location for the gauge with adequate access to the rear of the gauge for connections and fixings.
Switch off the ignition and remove the key. Disconnect the battery (earth terminal first). Note: Before disconnecting the battery, make sure all system start-up codes are known, i.e. coded radios etc.
Cut a 52 mm diameter hole at the chosen location for the gauge. Push the gauge into the hole and fit the “U” bracket over the mounting studs at the rear of the gauge. Fit washer(s) and nut to each stud. Align gauge and tighten nuts.
Connect the terminal marked “3” to a suitable ignition-controlled fused positive supply (timed circuit) and connect the terminal marked ”2” to earth or negative feed. The terminal marked “1” may be left unconnected or may be connected to a fused positive supply to allow the hour meter to be read with the timed circuit off.
Check that all connections are correct and secure. Reconnect battery (earth terminal last). Start the engine and check that the hour meter registers.
The hour meter may be reset to zero by momentarily connecting a positive feed to the solder terminal marked “4”.

Delivery

UK Mainland Postage Offer

Delivery Options Our Free UK Mainland Postage and Packaging Service offers unbeatable value for money. The free UK Standard shipping is automatically applied to your shopping cart page with no additional cost when you reach the £50.00 minimum order value.

We use Royal Mail Standard or Recorded Delivery for light, low-value orders and we use FedEx, UPS, Parcel Force, and other major courier services for larger and more valuable consignments.

International Consignments

Our international customers will need to provide the exact Card Holder Address (Invoicee) as the first address for payment processing. Please note that PO Box addresses are not acceptable as delivery addresses by some couriers. All export orders must be placed and paid for online. Proforma Bank Transfer IBAN and SWIFT payment methods are available to create online.

Also Bought