Durite 50A Grey High Current Battery Connector | Re: 0-431-05

 Durite 2-way 50A Grey battery cable connector for medium-duty automotive cables and vehicle wiring.

• Anderson type 50 Amps high current battery connector.
• The grey-coloured polycarbonate housing is generally used to identify a 12Vdc supply.
• Silver-plated solid copper terminals.
• Pack Quantity: Single, bulk and aftermarket.

Additional Information

• The connectors are 'genderless' and are connected by inverting one connector.
• They are colour keyed and cannot be mixed or interchanged with other colours.

Approximate Dimensions

• Length: 48mm
• Width (across fins): 36.5mm
• Height: 16mm

Associated Products

• 0-431-98 T-handle for the Durite high-current battery connectors.
• 0-431-85 PVC protective cover for Durite 50A connectors.
• 0-431-95 Durite protective cover and lanyard.

About The Grey 50 Amps Battery Connector

 Used as a light-duty battery cable connector, the Durite 50A Grey connector, when reversed, clips into another grey connector of the same part number to create a secure connect and disconnect plug for chargers. Due to the sturdy and reliable terminal and housing construction, the unit will stand up to rigorous daily use.

 Typically used as a light-duty, batteries connect and disconnect plugs on electric vehicles such as floor sweepers and light industrial electrical equipment.

 A common question regarding this connector is: does the unit require a different partner connector? The answer is no; to create the connection, you would use another connector of the same part number and rotate 180° (upside down), "Positive (+) to Positive (+)" and "Negative (-) to Negative (-)". You would require two units for a simple battery cable split connector or three if a connection to a charger is needed.