0-170-45 Durite 12V-24Vdc Amber LED Tail Lift Marker Lamp

 0-170-45 Durite 10-30V ultra robust Amber tail lift marker DI lamp with 18 flash patterns. Super strong cast aluminium construction with durable PC lens.

• Amber LED lamp with 250mm flying leads.
• 9 x 1.5W LEDs.
• It can be used as either a warning lamp, indicator or marker.
• 18 Flash patterns.
• Extremely robust - Cast aluminium with PC lens.
• Protected to IP67.
• E-Marked R10, R6 and R91 approved.

Wire Function

• Red = Positive 10-30VDC.
• White = Negative -VDC.
• Black = Flash Pattern Select. Sync Control.

Flash Pattern Control

• Change flash pattern = touch Black and White wire together once in one second.
• Reset flash pattern = Touch Black and White wire together three times in one second.
• Synchronization = select the same flash pattern for each lamp. Connect all lamp Black wires together to sync the lamps.

Alternating flash (Set light number 1 group)

 With all Black wires connected, touch the Black wire to the White wire 5 times in one second. The light will flicker, then touch the Black wire to the White wire one time to get a single flash pattern. Disconnect and reconnect as set Light number 1 group.

Alternating flash (Set light number 2 group)

 With all Black wires connected, touch the Black wire to the White wire 5 times in one second. The light will flicker, then touch the Black wire to the White wire twice to get a double flash pattern. Disconnect and reconnect as set Light number 2 group.

 NOTE: Flash Patterns number 8, 10, 16, 17 or 18 cannot be selected when multiple lights are connected.

Specifications