0-099-16 Durite 12Vdc Ford Custom LED Brake Light Camera

 Durite LED brake light camera fits Ford customs 2015-2022 and features 10 infra-red LEDs and 1/3 inch Sony CCD image sensor.

• Microphone
• 480TVL
• 1/3 inch Sony CCD image sensor
• Protected to IP68
• 10 Infra-red LEDs
• 10m extension cable
• Up to 35m night vision distance
• E Marked

Warnings

• Before using this unit, please read these instructions carefully.
• Take special care to follow the warnings and safety suggestions listed below.
• Keep these instructions for future reference.
• There are no user-serviceable parts within the unit. Refer servicing to qualified service personnel.

Precautions

• Please ensure you are familiar with and comply with local traffic and driving regulations.
• Connection - The camera should only be connected to a Durite CCTV system.
• Heat - Do not install the camera near heat sources.
• Mounting - Ensure the camera is facing the desired direction before fixing the camera base. If fixing to isolated return chassis, the camera bracket should be isolated from the vehicle chassis.
• Service - The user should not attempt to service these units beyond those described in these instructions. All other servicing should be referred to an authorised service technician.

General

• The camera has a CCD image sensor, which gives a high-quality picture, and its solid-state circuitry provides an extremely long life.
• The compact size and single connection make it easy to install.
• Automatic gain control (AGC) provides a clear image in both strong sunlight and low light conditions; if lighting conditions fall below a set level, the Infrared LEDs will illuminate.
• It is recommended that all camera lead connections are additionally sealed by either wrapping them with suitable tape or applying heat shrink sleeving.
• Connecting the system and testing before fixing it is recommended to ensure the correct field of view is displayed.

Image Viewing - Normal Vs. Mirror

• The default image is set to MIRROR Image Mode for reversing.
• To change to NORMAL Image, please refer to the guidelines in your CCTV Manual in the Monitor Control section.

Specifications